Best Rated threads in UK Do-It-Yourself Forumshow all threads

Subject Author Posted Replies
 
EPS (polystyrene) insulation and electrical cables (barrier).
The thought occurs to me that if I'm going to use EPS as insulation, with a sheet of Visqueen between the EPS and plasterboard finish, I will have to run cable between the Visqueen and the...
2
2
 
how did this happen ?
how did this happen ?
33
33
 
Obviously I am hallucinating.
First of all, Petrol stations with fuel and no queues, and now a delivery from a Romanian van driver. But I have been assured they had all gone home?
2
2
 
Electrical diy
Installed an external socket off a (new) fused spur from an an existing socket. Surprised myself when it worked first time. Pictures: ?e=ygYrq5 Store photos and docs online. Access them from any PC,...
58
58
 
Polishing compound in Parkside polishing set (2023 Update)
Hi, I got myself Parkside polishing set with their 75mm double bench grinder with flexible shaft. Polishing various surfaces using buffing felt wheels works fine but I had to resort to my own...
2
2
 
kent plonker
Exploring the island fort at Hoo and Darnet. The abandoned Fort has great views from the Drone and exploring the inside after a perilous boat trip over and wild camping the night on the island. Check...
5
5
 
How do they do that? - Freeing a cable
The first item on this video shows a trapped cable being freed is a bit of a con but what is it that makes the trick work? In this episode of Quantum Tech HD, we bring you some lifehacks that will...
11
11
 
Convert your angle grinder into a wood lathe
Don't forget your eye protection, and anything else that might get hit by flying debris. :-) Мало кто знает об этой функции БОЛГАРКИ !!! Смотрите крутые...
1
1
 
[SOLVED] petrol ageing ?
My Stihl service agent states that ALL petrol, 2 stroke mix and 4 stroke, stored for machine use must be dumped at season end . Really ??
26
26
 
Rechargeable AAA batteries for DECT phones
There was a discussion in this group a while ago about the best type and brand of rechargeable batteries for DECT phone handsets. I believe Eneloop was recommended as a good brand. Is there anything...
37
37
 
Can't start my strimmer
Hi All, I haven't used my Ryobi petrol strimmer for a few years. Tried it get it started today but no joy. There was no petrol in it (probably evaporated over the years as don't recall emptying it...
32
32
 
Internal walls of a bare brick shed - paint?
Hello all, I am in the middle of clearing out the brick outhouse which is about 2.3m x 3.2m internal. I want to turn it into a useful workshop space by installing some of the old kitchen units later...
10
10
 
Outwitting Your Vehicle's 'Brain'
Guys, I have an aging (18 year old) Mercedes W211 which has developed a fault which is causing the dash to light up like a Christmas tree. This one fault is causing 3 different warning lights and...
57
57
 
Squirrel deterrent
Can anyone recommend an electronic deterrent? TIA
10
10
 
Fixing overlapped edges of ceiling lining paper
When some previous owner put lining paper on the ceiling of the room I'm decorating they overlapped several of the edges by a couple of millimetres. From looking-around it seems the accepted fix is to...
5
5
 
Best glue for mending a broken tile?
I want to mend a small tile, it's not to re-use it, it's because it is a piece of work my daughter did at school many years ago and it would be nice to restore it to one piece. It's a fairly normal...
14
14
 
Lidl plastic utility cabinet
If you've some time to kill, need some outdoor storage, 70 quid burning a hole and some rage to expend, do me a favour. Go and get one of these Lidl outdoor cabinets, the tall one, and let me know.......
2
2
 
ptfe on olives?
Anyone wrap olives in ptfe ?
35
35
 
Gas hob safety cut out?
My elderly neighbour was immobile yesterday and rang me for help. I walked into the house and there was a very stong smell of gas. Is hob was on, with no flame, apparently from the night before when...
17
17
 
Fan oven motor
Turned my oven on tonight and the fan just hummed and didn?t spin. Turned it off and spun it with a stick poked through the slots and it ran fine after that. I?m guessing it?s on its way out but was...
9
9