washing machine rear drum seal

Jul 04, 2006 2 Replies
B

I have a servis washing machine on which i had to remove the rear drum clamp and seal. unfortunately i cannot get it to seal again. i have tried reversing the metal clamp but this does not work. as i cannot remember the correct position of the rubber seal i have a question; does the rubber seal go between the drum lip and the back panel lip and then the metal clamp or does the rubber seal go over both the back panel lip and drum lip with the clamp going over the rubber seal? any help would be appreciated.



bap



Vote
Twitter Facebook LinkedIn
A

IME, those seals never reseal once disassembled (unless very new). When I am going to dismantle a drum, I get a new drum seal first to use on the reassembly.

CPC may sell them, although I'm not familiar with Servis.

Vote
Twitter Facebook LinkedIn
B

Thanks Andrew i will try and obtain one,can you tell me the positioning of the seal and whether it matters which way round the clamp ring is fitted i.e. has it a front and back .

Thanks

Andrew Gabriel wrote:

Vote
Twitter Facebook LinkedIn

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required