Latest threads in UK Do-It-Yourself Forumshow only best voted threads
| Subject | Author | Posted | Replies | |
|---|---|---|---|---|
|
|
Ping Geoff : Boiler question ...
A few feet of copper wire shouldn't drop that much volts. My first thought was "tired" contacts in the thermal switch but that appears to be ruled out. So that leaves checking that all the connections...
13
|
11 years ago
|
13 | |
|
|
ELCBs
Since discussion on them has come up a couple of times recently, thought it might be useful to collect together some information on them and the old testing procedure: / additions etc welcome.
5
|
11 years ago
|
5 | |
|
|
El cheapo 12/240 inverters and laptop smps's.
Anyone have experience of using these together? TIA.
5
|
11 years ago
|
5 | |
|
|
RCD follow up
Thanks to those who explained about the 300mA ELCB. I've been and had a look. The ELCB does trip when you press the test button. I don't know why she said it didn't. Anyway, here's a picture of the...
55
|
11 years ago
|
55 | |
|
|
Oil CH copper pipe diameter - ID or OD?
I need to replace a bit of central hearing oil pipe which measures 10mm OD. If I get some pipe and fittings which are quoted as being 10mm, will I get what I want, or might I get something that is...
5
|
11 years ago
|
5 | |
|
|
Add-on bypass circuit for combi boiler?
Hi all, When they installed the standard gas-fired, hot water central heating in my 3-bed semi, the plumbers insisted that my large lounge radiator should not fitted with a TRV, because it needed to...
40
|
11 years ago
|
40 | |
|
|
OT; Bad company name
Noticed in local Yellow Pages, ready mixed concrete firm called: Jim'll Mix It. Oh dear :-)
44
|
11 years ago
|
44 | |
|
|
Replacing a conservatory (permissions, drains, etc.)
Hello - My house has a disproportionately large conservatory attached, built by a previous owner, at least 10 years ago. It's a poor quality thing in every respect. Most importantly, the foundations...
—
|
11 years ago
|
— | |
|
|
Triphosphor Fluorescent Tube
I have 2 geartrays on the kitchen cupboard tops running 58w T8 1500mm tubes and when one tube failed I replaced both with triphosphor ones and now I find that they take about a minute to come up to...
1
|
11 years ago
|
1 | |
|
|
replace torch filament with led
I see one may buy replacement 1W capsules for torches but they cost over a tenner plus postage. I also note that many cheap led torches have multiple leds and 3 cells to a battery with no electronics....
3
|
11 years ago
|
3 | |
|
|
Plasterboard ceiling
I'm about to replace a small ceiling (7'4" X 7') with tapered edge plasterboard. I am not skilled enough to do a good job with skimming it so intend to just fill in the joints and paint it. Hence the...
12
|
11 years ago
|
12 | |
|
|
Do you ever wonder how much heavier your house is...
...than when you bought it/when it was built? When I think of the timbers, boards, tiles, plaster, pipe and even paint etc that have passed over our threshold over the years with much less being taken...
20
|
11 years ago
|
20 | |
|
|
Is there a lower safety standard for Xmas tree lights?
I thought this type of mains operated series chain was no longer legal, but clearly I was wrong. Bought this today. don't think you could sell (say) a table lamp with a mains lead like that, even if...
2
|
11 years ago
|
2 | |
|
|
Electrical survey required for house sale?
Apologies if this is something I should be able to find easily with google, access blocked from work but I can get to usenet from my phone! Just had concerned phone call from my MiL. We're in the...
31
|
11 years ago
|
31 | |
|
|
Tiling onto platerboard - primer?
I don't normally bother using primer and would just fix the tiles to the dry plasterboard but i'm going all the way to the ceiling with 400x250mm tiles. Will there be any benefit to priming first? I'm...
7
|
11 years ago
|
7 |