What is it? (Amateur version Post #18)

replying to Larry Flynn, Iggy wrote: That's a tough lot, I'm not sure of anything here. 1 - I'll go for Saw Sharpening Files. 2 - I got nothing. 3 - I have to go with Drain Removal/Installer Set. 4 - I got nothing.

Sonny

ead. As usual, I will try to answer questions about their composition, size and how they can move. Pictures are provided via Dropbox.

g. The metal part is tapered but the tip is broken. The metal part has a co arse surface with one face flat and the other rounded.

of the shafts have slight centered indentations. One end has a hollowed ou t component surrounding the shaft. This rounded component has a diameter o f 2½ inches and extends 1¼ inches along the shaft. It has three ¼ inch diameter hole equally spaced. There are 20 slits between each a djacent pair of holes. The component is open about the shaft end but is fi rmly attached at the other end. Just next to this component there are three movable loose rings on the shaft separated by three rings fixed to the sha ft. The first ring fixed to the shaft has a groove along its edge but the other five rings are smooth. I do not know what this tool is used for.

at can be attached to the long shaft by a small bolt. When it is assembled, there are two round faces. One has face with three projections and the oth er has four. Each round face can be screwed onto an object by using one of two threaded metal collars. The manufacturer and tool name has been hidden.

has a metal hook and the other has a wooden handle. The hook and handle ar e aligned in the same plane. The hook is two inches long and is not sharp. The metal has very little flexibility.

Best I can offer for Item 4 is a lace tightening tool...Used to have someth ing very similar for my ice skates...

hread. As usual, I will try to answer questions about their composition, si ze and how they can move. Pictures are provided via Dropbox.

ong. The metal part is tapered but the tip is broken. The metal part has a coarse surface with one face flat and the other rounded.

ds of the shafts have slight centered indentations. One end has a hollowed out component surrounding the shaft. This rounded component has a diameter of 2½ inches and extends 1¼ inches along the shaft. It has three ¼ inch diameter hole equally spaced. There are 20 slits between each adjacent pair of holes. The component is open about the shaft end but is f irmly attached at the other end. Just next to this component there are thre e movable loose rings on the shaft separated by three rings fixed to the sh aft. The first ring fixed to the shaft has a groove along its edge but the other five rings are smooth. I do not know what this tool is used for.

that can be attached to the long shaft by a small bolt. When it is assemble d, there are two round faces. One has face with three projections and the o ther has four. Each round face can be screwed onto an object by using one o f two threaded metal collars. The manufacturer and tool name has been hidde n.

nd has a metal hook and the other has a wooden handle. The hook and handle are aligned in the same plane. The hook is two inches long and is not sharp . The metal has very little flexibility.

thing very similar for my ice skates...

Close...it's a hook for pulling on riding boots.

Skate lace tighteners have a short, pointy hook perpendicular to the T-hand le.

(I used to speed skate)

ead. As usual, I will try to answer questions about their composition, size and how they can move. Pictures are provided via Dropbox.

g. The metal part is tapered but the tip is broken. The metal part has a co arse surface with one face flat and the other rounded.

Hint: This tool has Disston No. 2 stamped on the handle.

of the shafts have slight centered indentations. One end has a hollowed ou t component surrounding the shaft. This rounded component has a diameter o f 2½ inches and extends 1¼ inches along the shaft. It has three ¼ inch diameter hole equally spaced. There are 20 slits between each a djacent pair of holes. The component is open about the shaft end but is fi rmly attached at the other end. Just next to this component there are three movable loose rings on the shaft separated by three rings fixed to the sha ft. The first ring fixed to the shaft has a groove along its edge but the other five rings are smooth. I do not know what this tool is used for.

Hint: I now know what this tool is. It is used in the kitchen.

at can be attached to the long shaft by a small bolt. When it is assembled, there are two round faces. One has face with three projections and the oth er has four. Each round face can be screwed onto an object by using one of two threaded metal collars. The manufacturer and tool name has been hidden.

Correctly identified as a Sink Strainer Wrench.

has a metal hook and the other has a wooden handle. The hook and handle ar e aligned in the same plane. The hook is two inches long and is not sharp. The metal has very little flexibility.

Correctly identified as an English Boot Hook.

that can be attached to the long shaft by a small bolt. When it is assemble d, there are two round faces. One has face with three projections and the o ther has four. Each round face can be screwed onto an object by using one o f two threaded metal collars. The manufacturer and tool name has been hidde n.

I thought it could be a massage tool. Or a sex toy.

s that can be attached to the long shaft by a small bolt. When it is assemb led, there are two round faces. One has face with three projections and the other has four. Each round face can be screwed onto an object by using one of two threaded metal collars. The manufacturer and tool names have been h idden.

You are free to purchase your own.

I carry one of these in my camp cooking box. I use it to pull the lid off dutch ovens while baking breads and desserts using wood coals on the dutch oven lids. Works better than an S hook.

ces that can be attached to the long shaft by a small bolt. When it is asse mbled, there are two round faces. One has face with three projections and t he other has four. Each round face can be screwed onto an object by using o ne of two threaded metal collars. The manufacturer and tool names have been hidden.

See... I was right. Scroll down on that page:

"Use On Sexauer Strainer"

ead. As usual, I will try to answer questions about their composition, size and how they can move. Pictures are provided via Dropbox.

g. The metal part is tapered but the tip is broken. The metal part has a co arse surface with one face flat and the other rounded.

of the shafts have slight centered indentations. One end has a hollowed ou t component surrounding the shaft. This rounded component has a diameter o f 2½ inches and extends 1¼ inches along the shaft. It has three ¼ inch diameter hole equally spaced. There are 20 slits between each a djacent pair of holes. The component is open about the shaft end but is fi rmly attached at the other end. Just next to this component there are three movable loose rings on the shaft separated by three rings fixed to the sha ft. The first ring fixed to the shaft has a groove along its edge but the other five rings are smooth. I do not know what this tool is used for.

at can be attached to the long shaft by a small bolt. When it is assembled, there are two round faces. One has face with three projections and the oth er has four. Each round face can be screwed onto an object by using one of two threaded metal collars. The manufacturer and tool name has been hidden.

has a metal hook and the other has a wooden handle. The hook and handle ar e aligned in the same plane. The hook is two inches long and is not sharp. The metal has very little flexibility.

A tougher lot this time. Here are the answers.

TOOL 69 A much used Disston #2 Hand File/Rasp TOOL 70 Molinillo; Hot Chocolate Whisk, Stirrer and Frother