Hi all,
Found a couple of references to this topic in the archives but no real solution.
We have a dual flush wc, one of those with two buttons in the lid of the cistern. Anyway, the problem is that the thing is continually letting water through into the pan.
I dismantled the "syphon" bit today and kind of figured out how it works, there's a rubber seal that looked like it need a good clean. So cleaned it and reassembled everything.
Still leaks, it does look like the pipe that the seal is attached to is leaning slightly and may be causing it to not seat properly.
Anyway, does anyone know how to fix this? The whole unit is just over 2 years old.
If I have to replace it, what's the thing called?
cheers Mitch