Latest threads in UK Do-It-Yourself Forumshow only best voted threads

Subject Author Posted Replies
 
tapered dowel
Having cut the hole in the newel base with a 50mm holesaw, it has ended up about 50.5mm and the newel turning spigot is not quite tight enough. I wish to fit my newel turnings using the method shown...
5
5
 
creosote smell
My son soaked the rafters of a bedroom extension with creosote about a year ago and unfortunately the smell of the creosote is still making it impossible for my granddaughter to sleep in the room. He...
9
9
 
How to replace 1120mm wide radiator?
Hi I have a radiator that is 1120mm wide. It is certainly more than 35 years old. I have two questions: The main motivation for replacing it is that it looks old and has lots of coats of peeling...
8
8
 
Digital camera: question about noise
The bigger the sensor, the bigger the individual pixels (at a given megapix). The bigger the pixels, the lower the noise at high ISO. My Canons has a setting which alters the x-y resolution of the...
58
58
 
Telephone issues - partly on topic
My BT line has a fault that's making a bad crackle and it looks like BT Openreach won't be able to fix it.   I have Virgin cable broadband - if I add a phone on this how easy is it to wire it into...
39
39
 
Plain Tile - felt support @ eaves.
Need to do some plain tiling on a 35 degree pitch roof ... It is 4.3 x 4.3 m square with all 4 corners fitted with bonnet hips. The Q relates to eaves .. on previous job I used these Felt support...
3
3
 
transporting fridge
While we are doing up our kitchen we want to buy a second hand fridge and keep it in the garage; it would fit into my car if laid on its side. Does anyone know if a fridge can be transported on its...
20
20
 
Cavity wall and roof insulation and condensation
Hello all, My ongoing saga of condensation. By now I think everyone knows about the dripping walls in the kitchen in winter. The walls are dry now because its heated up and stopped raining a bit and I...
63
63
 
moving and enlarging consumer unit
Hi, I think I am going to need a bigger consumer unit. There are no spaces for expansion and I think I might need to add a new radial when I buy the new induction hob (which will be 7.2kW). The...
3
3
 
TOT How to run a successfully pub
First, increase the prices to be the most expensive in the area. Second, change the paint scheme on the outside of the pub from a mock Tudor style with fake beams, which is a local landmark, to Army...
22
22
 
How to make artist's palette?
My mother-in-law does a bit of picture painting with acrylic artist's paint s, I would like to make a proper wooden palette for mixing them, the questi on is what kind of wood treatment to use? I...
4
4
 
Spare parts for secateurs
I have a perfectly good pair of Fiskars by-pass secateurs except that I have lost the spring which goes between the handles and this makes them very awkward to use. Has anybody any idea where I could...
14
14
 
Anyone still running Thorn M44/54 gas boiler? (2023 Update)
I've just decommissioned mine and junked most of it but I still have odd parts like the Honeywell V4300 gas valve. Does anyone who is still nursing one of these want the gas valve as a spare? No known...
24
24
 
double socket change to single socket plus spur for disposal unit
Beside my sink there is a double socket. I am planning fitting a waste disposal unit and will need a spur to power the disposal unit. Both existing sockets are hardly ever both used at the same time,...
22
22
 
OT. Interesting link about the future.
So what does the panel think about this one? Can't fault the logic personally. And more important, what to do about it? Get your first 6 issues of MoneyWeek for free with this offer. Save an...
15
15