Is it normal for guys to pour concrete in flip flops? Or am I the weird one?

Nov 19, 2026 Last reply: 1 hour ago 5 Replies
Saved reading

First reply

kmckay

Yeah, wet cement really is caustic. It's high in lime, which is alkaline, and it keeps eating at skin as long as it stays on. The nasty part is you often don't feel it right away, so guys who get sloshed and wipe it off with a rag can end up with a proper chemical burn hours…

Read the full reply

Had a crew come out last week to pour my patio slab and one of the guys spent the whole morning walking around the rebar in slides. Not boots, not even old sneakers. Slides. Bare toes about six inches from where the chute was dumping the whole time. I didn't say anything because I figured they know their job better than me, but it's been bugging me since. Isn't wet cement basically caustic? Like if a splash lands on skin it can actually burn you? He never got a drop on him the entire day, luckiest guy alive I guess. Second thing, and maybe this is related, the finish looked rough around the edges near the forms. Little dips and soft spots right where he was stepping closest. Could that be from working around your own footprints the whole time, or is that just how a pour goes sometimes? Not trying to get anyone fired, just wondering if I shold say somethig next time or mind my business.


Yeah, wet cement really is caustic. It's high in lime, which is alkaline, and it keeps eating at skin as long as it stays on. The nasty part is you often don't feel it right away, so guys who get sloshed and wipe it off with a rag can end up with a proper chemical burn hours later. I've seen a laborer get it inside his boot cuff from kneeling in slop all day, and the skin peeled off in sheets. Bare toes near a chute is not someone who knows thier job better than you, it's someone being dumb or new and nobody on the crew checking him.

On the soft spots question, when I had my pad poured I asked the finisher about a similar thing and he said stepping close to the forms on a fresh pour is normal, they just walk the boards or use their screed to reach. The dips near the edges on yours sound more like rushed work, maybe he was crowding the form because he was picking his way around on those slides instead of standing where he needed to be.

As for saying something, I'd call the company office, not the guy on the job. I had a subcontractor show up to demo without eye protection once, mentioned it to the gc and it got handled quietly. Receptionist will know exactly who ran your job.

On the whether-to-say-something question, I'd frame it as a jobsite concern rather than a correction, something like 'hey, should I be worried about anyone stepping on that rematuring edge' said while they're on break, because I've found most crews will grumble a little but a reputable contractor actually wants to know before someone gets hurt on your property, since an injury on your slab can turn into your problem too. I asked a guy once to move his truck off my new driveway and he did it without drama, so a light touch usually works. Also, rebar sticking up barefoot is a whole different injury than a burn, those things have edges.

That tracks with the pour we had done a couple summers back. Our finisher wore rubber boots the whole time and still stayed off the slab as much as he could, reaching with a bull float from the edge instead of walking out on fresh concrete. The one spot that ended up wavy was right where the mix was a bit too wet and they had to rework it, nothing to do with feet. I'd say the dips near your forms are a sign the guy had no business being that close in slides, not just a normal pour thing. If they come back for any future work I'd be tempted to watch the first ten minutes before letting them start.

Update: took the advice about framing it as a jobsite concern and called the office instead of saying anything to the crew. Asked wheather they send guys out with rubber boots and a plan for staying off fresh work. The person I spoke with was actually receptive and said they'd pass it along. Also that detail about burns not being felt right away explains why the foreman kept hollering at everyone to rinse off. Watching how the edges cure out before I decide whether to hire them again.

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required