Why does my Samsung fridge keep freezing everything in the bottom drawer?

Nov 19, 2026 Last reply: 1 day ago 5 Replies
Saved reading

First reply

slate_echo

And don't let them charge you again for the damper visit. If a tech came out, diagnosed a part, replaced or checked it, and the problem persists, that's on them. Call the company you booked through, reference the first visit, and insist the follow-up be covered. If the next…

Read the full reply

Bought one of those Samsung fridges with the big touchscreen about three years ago and it's been mostly fine til recently. Now the bottom drawer keeps turning everthing into popsicles. Milk gets slushy, eggs crack, lettuce is ruined. I've turned the temprature down as low as the panel allows and it barely helps.



What's odd is the top section stays perfect. So it's not like the whole unit is running wild, just that one zone. I had a repair guy out once and he said the damper might be stuck open, charged me for a visit, and it did nothing. He also mumbled something about a control board but couldn't say for sure.



Is this a known thing with these models or did I just get unlucky? I keep reading that a software update caused similar chaos for some people and I did notice the screen updating around when this started.



I don't want to sink another repair bill into it if the real answer is the main board is shot. Anyone been through this and actually fixed it?


And don't let them charge you again for the damper visit. If a tech came out, diagnosed a part, replaced or checked it, and the problem persists, that's on them. Call the company you booked through, reference the first visit, and insist the follow-up be covered. If the next tech confirms the sensor or the main board, get the diagnosis in writing before you approve any repair, so if it doesn't fix it you've got leverage.

First time posting here so forgive me if this is a dumb idea, but this reminds me of my old fridge where the freezer section started icing everything solid. Turned out frost had built up in the little air vents inside and the cold air was just dumping into one spot. I emptied it, left the doors open overnight to fully thaw, and it ran normal again after that. No idea if a fancy touchscreen model has the same kind of vents though? Might be worth peeking in the back of that drawer before spending money on a board.

We went through something similar with our old fridge where only one part went crazy cold while the rest was fine. Turned out the rubber seal around that section was torn, so warm air kept sneaking in and the thing just ran nonstop trying to compensate. Might be worth feeling around the edge of your drawer for any gaps or cracks in the seal. Also try pulling the plug for like ten minutes and plugging it back in. Someone told me that resets the little computer brain inside and honestly it fixed a wierd temp issue for us once. Does your model have a seprate setting just for that bottom drawer, or is it all one temperature setting?

Same family of headache here, ours was the temp sensor in that zone reading way colder than it actually was, so the board just kept dumping cold air in. Tech swapped the sensor for cheap and it's been fine since. Might be worth asking the next guy to read what that zone's sensor is reporting before he starts throwing parts at it. And yeah the software update thing is real, mine got wonky right after one too, though a full unplug and restart sorted the weirdness that time.

Update: so the seal suggestion panned out. Ran my hand around the drawer gasket and found a worn spot letting warm air in, which explains why it never stopped running. New gasket is on and the freezing has mostly calmed down. But now I'm seeing frost building up in those little vents like the second poster described. Is that just leftover junk from before or does it need clearing again regularly?

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required