Latest threads in UK Do-It-Yourself Forumshow only best voted threads
| Subject | Author | Posted | Replies | |
|---|---|---|---|---|
|
|
Stability of 240v supply under FIT tarrif?
Sigh As I said earlier I further note from the above that it can result from defective/useless digitalised equipment and so be entirely spurious. Ie not exist at all. A lot of digitalised...
131
|
10 years ago
|
131 | |
|
|
OT; starting a blog.
How does one go about it?
10
|
10 years ago
|
10 | |
|
|
new/replacement roof - anyone with experience integral pv roof tiles?
My south facing tiled bungalow roof needs refurbishment. Does anyone have experience of integral solar pv tiles installed on the sunny side of the roof? One example of the style under consideration is...
3
|
10 years ago
|
3 | |
|
|
concrete railway sleepers
I am looking to span a stream about 1500mm with some prestressed concrete railway sleepers an wondered what load they would take. Car, transit or concrete truck. Is anybody up on structural...
18
|
10 years ago
|
18 | |
|
|
OT but oft discussed in this NG: Norway dumps carbon capture
and The outgoing government in Norway buries much-vaunted plans to capture carbon dioxide and store it underground amid mounting costs and delays. http://tinyurl.com/nta2kdn
—
|
10 years ago
|
— | |
|
|
Outdoor lights
Hello there I'm after some advice please. I'm a pretty competent DIYer.... We've currently got two outside circuits which are each connected to a 5amp fused switch, and the connected to a socket each...
8
|
10 years ago
|
8 | |
|
|
Watching paint dry.
Or rather I don't want to watch it any longer. I have painted a corner in my kitchen ( following lots of renovations and electrics being moved etc -long story). The corner is small and cramped and...
12
|
10 years ago
|
12 | |
|
|
Stone for door step
We are having our front block paved (tumbled blocks 60mm thick) and I am considering something different immediately in front of the front door as a feature. It needs to be 36" x 34" Any thoughts on...
3
|
10 years ago
|
3 | |
|
|
Radiator valve
Any idea where I can get these: The valve is branded Altech. It's more the elbow bit that connects the valve to the 10mm plastic pipe that I'm after....
11
|
10 years ago
|
11 | |
|
|
How do you clean venetian blinds?
How do you clean venetian blinds? I wouldn't have imagined it was anywhere near as difficult to do as I found it. What am i doing wrong?
18
|
10 years ago
|
18 | |
|
|
Wake Up
Duncan Bannatyne reveals how to set up a business and make it a great book provides the perfect wake-up call for you to change your life for the better Download Audiobook >>
—
|
10 years ago
|
— | |
|
|
Drilling and tapping stainless
At some point in the next week or two, I'll want to drill and tap a dozen holes into stainless steel tube, this is 2mm wall thickness, 42mm diameter handrail, I'll have a 100-200mm offcut to practice...
46
|
10 years ago
|
46 | |
|
|
Mad as a hatter, or how to reclaim.....
mercury from fluorescent tubes and cfl's? I use a fair bit of mercury, clockmaking, jewellery, baros etc. My stock is running a little low and the substance is becoming increasingly hard to obtain. I...
36
|
10 years ago
|
36 | |
|
|
Clearing guttering
Hi guys, Is there a pleasant way to clear all the crud out of gutters? I mean a not-too-horrible way at least? And what is that stuff?? It looks like silty earth, but how the heck can earth get up to...
28
|
10 years ago
|
28 | |
|
|
Cables in new wall
Hi, I'm building a small double-skin wall outside in my garden to act as a fenc e. It is between the side-gate and the corner of my house, and approximatel y 1m long. I'm nowhere near from finishing...
21
|
10 years ago
|
21 |