I came across an old Stanley router and base. The cord is in bad shape so I haven't fired it up to see it the motor works. Right now, the base won't turn. It will rotate about 10-15 degrees and then jam. In one direction, it hits a hard stop, the other just gets real tight. I've removed the lock but still no go.
I've Googled it and came up with nothing on this model number. I know Stanley sold off to Bosch and the Bosch site has nothing either.
The handles are mounted on the motor and not the base. I can post pics to ABPW if it's "safe" to back in there. ;)
Anybody know anything about this or where I can find some reference material?
TIA