Looking for Hardened Steel 1/2-20 Drill Guides

Valley is the bomb.

JP

That's a little better, but not a lot, wouldn't you think that someone would have them priced under a buck each or so? As many as I'm going to need, I guess it's going to get expensive... Thanks for the link though, definitely an improvement!!

Remove the nospam from my address to email me!!

Try

Toll Free at 1-800-220-7050

Looks like you have to call for pricing

Good Luck

they have a lot of different types. I have some hardened ones that really have shown no abuse i na years serves and hundreds of holes.

Considering what it takes to make one, no I wouldn't.

wouldn't you think that someone

The following can be ordered from H.F.Wilson Engineering at (888)HFWILSON or

website has some problems so go to "Search" and search for the stock # or keyword bushing.

The inserts are the press-in units that the bushings then screw in to. (They are 1/2" x 20tpi)

JIG & FIXTURE INSERTS

06150 - 3pk jig and fixture inserts $5.24 06152 - 10pk jig and fixture inserts $13.60 06154 - 24pk jig and fixture inserts $31.31

DRILL GUIDE BUSHINGS

06110 - 3pk 1/8" bushings $5.24 06111 - 3pk 3/16" bushings $5.24 06112 - 3pk 1/4" bushings $5.24 06113 - 3pk 5/16" bushings $5.24 06114 - 3pk 3/8" bushings $5.24

06120 - 10pk 1/8" bushings $13.60

06121 - 10pk 3/16" bushings $13.60 06122 - 10pk 1/4" bushings $13.60 06123 - 10pk 5/16" bushings $13.60 06124 - 10pk 3/8" bushings $13.60

06130 - 24pk 1/8" bushings $31.31

06131 - 24pk 3/16" bushings $31.31 06132 - 24pk 1/4" bushings $31.31 06133 - 24pk 5/16" bushings $31.31 06134 - 24pk 3/8" bushings $31.31

These are longer bushings and should be available since H.F.Wilson makes them. The web site doesn't list them. BUSHINGS FOR SELF-CENTERING DOWELING JIGS

07203 - 3pk 1-3/4" x 1/4" 07204 - 3pk 1-3/4" x 5/16" 07205 - 3pk 1-3/4" x 3/8" 07206 - Set of 3 - 1/4", 5/16" & 3/8" $6.25

Hope this helps. Al McClure

PS - Thanks for posting this question. I've been meaning to research this as I have had need for these bushings in quantity myself for a future project. ARM

Thanks Al!! This is right on track, and I really appreciate it!!]

Remove the nospam from my address to email me!!