brackets that allow easy removal

You need to be more specific in the application.

For starters just do a Google search on "knock down furniture connectors" That will give you a wide selection (and sources) for the type of connectors associated with RTA furniture, etc.

McMaster Carr

Electric Comet wrote in news:mvuk2g$vis$ snipped-for-privacy@dont-email.me:

I'm guessing if you knew what the thing was, you'd be able to describe it in more detail.

In any event, is a mending plate what you're thinking of?

Or a bed rail fastner?

John

have not tried that combo of words yet

i did have some luck using interlocking some of the interlocking variety are quite expensive

there are some small ones that are cheaper

i may just make something of wood

hanger with a screw and the board will rest on the hanger

wow they have a lot of products

This kind

works for me; you can also use hinges (screw one half to the fixed thing, the other half to the board, slide the hinge pin out to dismount).

Search bed hardware or knock-down hardware.

just a few examples. John T.

--- news://freenews.netfront.net/ - complaints: snipped-for-privacy@netfront.net ---

yes previously mentioned but too large for this application

i found these at the macmartin site too they are closest to what i need

i thought about hinges but i only found regular size hinges that have a removable pin and they are too big

How about "keyed" mortise and tenon joints? Or angle iron and nuts and bolts?

... these loose pin hinges are 2 x 3 inches

... buy some extras - only 50 bucks a pair . :-)

These little guys are only about 1 inch -

jt

--- news://freenews.netfront.net/ - complaints: snipped-for-privacy@netfront.net ---