Hi All
I want to remove a metal strip that I believe is glued (say manufacturer) to a clear glass shower screen (toughened 8mm glass) along the longest edge - it looks ugly and I want to replace it with a white plastic strip.
Is there any way of removing this metal strip or would removal break the glass?
Rgds., Tom
=================================================
Acetone might work and if it doesn't it will evaporate without damaging anything.
Cic.
Unless it is laminated glass, acetone may dissolve lamination along edge.
Thanks for the replies - I'm reasonably sure that its not a glass with laminate but I wonder how strong the glue is likely to be and how the metal would come off it first.
I presume that breaking toughened glass is pretty difficult ?
Has anyone attempted such a thing or will I be the first?
Rgds., Tom
If you damage the 'edge' toughened glass is very likely to shatter. It's only strong against the faces.
R.
Except at the corners - um?
Would it be easier just spray it white?
Toby...
Have something to add? Share your thoughts — no account required.
Ask the community — no account required