Hi,
I have the above timer attached to a Concord combi boiler. at 4.30 pm this afternoon the timer appears to have stopped working and no longer rotates. I have checked the fuse on the plug for the timer and indeed changed it, to no avail. I currently therefore have no heating or hot water as the programmer / timer cannot switch the heating or water to on, even with the manual (ON) setting
Can anyone suggest anything i should check?
Many thanks ina dvance,
Max
In message , FormbyMax writes
I presume you can still switch it on and off manually
There are two possibilities -the motor or the gearbox (unless the cam has split and is jambing it).
If you put your ear to it, you should be able to hear the motor turning
If you can, it's the gearbox, if not it's the motor
On Thu, 20 Jan 2005 22:10:54 GMT, raden strung together this:
Er, no. not according to the last line of his post!
On Thu, 20 Jan 2005 19:56:46 GMT, FormbyMax strung together this:
How about checking for a supply?
In message , Lurch writes
Silly me
In that case OP ... is there any power to the timer ?
If not that would explain why the dial's not going round and the switched live (s) is (are) powered from the live to the timer IIRC
I'll try and learn to read
Have something to add? Share your thoughts — no account required.
Ask the community — no account required