Odd flex

Dec 18, 2017 66 Replies

I don;t remmeber it being very noticable in the famous picture of the earth taken from the moon, or when Voyager 1 took a look back at the solar system .

The lord raglan was one of my local pubs too.

On Wed, 20 Dec 2017 16:30:26 +0000 (GMT), "Dave Plowman (News)" coalesced the vapors of human experience into a viable and meaningful comprehension...

Do we really need a choice of three or four different bases for the SAME lightbulb? Perversely, in some stores, bayonet cap lamps and fitting are in the minority, or even not carried at all.

If getting out of the Single Market means retailers can no longer insistantly claim that Edison Screw are "standard", then I'm all for it. I've got really fed up of clueless little housewifes asking me to replace their light fittings because the "standard" bulbs they've bought don't fit them.

Something else that Brexiteers aren't going to get, then.

Sounds like they need a little screwing.

No different to the massive choice of different heads for the same inch and half screw (or that 40mm copy)!

"Make everything PZ2 and BC" is going to be my winning slogan when I stand for world ruler.

Do we need to send missionaries to bring you Torx?

I reckon you'll thank us for it if your eyesight and fine motor control go with age.

Having removed & replaced about 50 bolts in electrical sockets yesterday, I'm inclined to agree with you.

If anything we will all end up screwed.

G.Harman

Of course. All the world should use the UK bayonet cap. That is the principle behind Brexit. ;-)

If the electrical sockets "machine screws" were PZ2 you would not need Torx:-)

but they'd look crap, hence we used slotted.

The solution to a proliferation of competing standards is usually to introduce a new universal standard. Then you've got yet another standard to deal with.

Someone needs to invent a socket that takes all types of bulb cap.

NT

That's only part of it. They drive on the wrong side of the road, use some odd measurement using Km and are unable to understand a final ring circuit......

If looks matter so much to you I'm surprised you use don't insist on "screwless" socket and switch plates.

I expect there is precisely such a socket out there somewhere, but it's only available among the well-connected elites. ;-)

You don't know how much looks do or don't matter to me and don't know what I do or don't insist on. But feel free to make it up.

NT

Fair enough. And you can then add to the list of things I don't know what you meant by "but they'd look crap, hence we used slotted".

I certainly felt free to killfile your drooling nonsense.

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required