I'm looking for some 1/4" hex bits which are genuinely suitable for use with an impact driver. I have a 1/4" driver capable of up to over
I'm particularly needing bits for slotted screws at present so a set with a good number of slotted screw bits, preferably with more than one of each size would be good. I don't need torx or square bits at all, though some pozi and philips bits would be handy.
Any recommendations?
Most recent 1/4" set I bought were Bosch, 100mm impact rated with the "torsion" shape, mixture of Pozi, Philips and Torx, no slotted. I've not given them much welly on anything ... not sure I'd expect slotted bits to fare too well with impact wrenches?
I have these which are good, but they don't come in slotted:
Theo
Yes, I agree about slipping and mangling. I'm not aiming to do this often but I have some stuck grub screws that might just respond to the treatment.
Screwfix do some Erbauer impact bits that are pretty good. An assortment for a tenner, or you can buy just the straight ones.
Bosch or Wera.
Theo <theom+ snipped-for-privacy@chiark.greenend.org.uk> wrote in news:Drc* snipped-for-privacy@news.chiark.greenend.org.uk:
Slotted here:
Saxton Blades
+1 or Wiha
Have something to add? Share your thoughts — no account required.
Ask the community — no account required