Hi
The door seal on the freezer compartment of the Bosch KGV3120GB has "collapsed" or "bowed" slightly so a complete seal is not made. There is ice build up at this point in the freezer. Bosch only supply a complete replacement door at 90 pounds !!! Is there any other fix for this seal ??
Thanks
Clive
Wipe margarine down the spot on the casing. Rub the spot on the seal with wire-wool. Run a bead of silicone sealant along the seal. Close for 24 hours. Clean off margarine.
Solution:
I cut some expanded polystyrene to size with a craft knife and stuck with some flexible sealent "behind" the door seal to "push" it out and complete the seal between the door and the frame of the fridge.
Job done. No icing up since.
Clive
Have something to add? Share your thoughts — no account required.
Ask the community — no account required