15 discussions on HomeOwnersHub about the Makita HR2450X: what owners asked, what went wrong, and what fixed it.
A few months ago I was looking for a 165mm mains circular saw & ended up with a Macalister from B&Q for £45. Spec looked good for the money.Less than 3 months old, relatively little use & it started playing up.Cross cutting a 2 x 4 & it...
I want an SDS drill for some work on brick and concrete, but I wantone that'll be very good for general DIY as well. I'm considering onefrom the Metabo range as they have a very good quick change mechanismfor swapping the SDS chuck with a...
Today I got sent a mini-catalogue from Screwfix. One of their AutumnSpecial "offers" was a Bosch "2kg SDS Plus Rotary Hammer" drill.Is there any significance in the "2kg" bit (actually detailed as2·4kg)? Possibly a larger mass will effect...
My 4 year-old NuTool SDS+ unit has come to the end of it's useful life - cracked nose section and failed rotate + hammer/hammer only selection mechanism (it is locked in 'rotate + hammer' mode). The failed action selection is not a terrible...
HiI'm currently looking at:BOSCH GBH2-22REBOSCH GBH2-26DREMAKITA HR2450 (does anyone know what the difference is between the X and the T model?)I currently have an 850watt (non SDS) Bosch. But I've found it has trouble getting through some...
Trying to justify to myself, getting a SDS drill. Does anyone use itfor the insides of external walls ? Usually use a hammer drill for thisbut was drilling a hole through the external walls (16mm Ø for pipeworkfor a garden tap )...