Latest threads in Home Repairshow only best voted threads

Subject Author Posted Replies
 
2 Part Electrical question...
This is a long post but I'm young and dumb and you guys are smarter and I'm bouncing ideas off. I'm converting the reading room in our home into an office. Against one wall I'd like to build and...
9
9
 
stranded wire
I've got a bit of rewiring to do in some tight spots (porch lights). 12-3 solid wire is always such a pain to work with I was thinking of using some of the rubber coated stranded wire (still 12-3). In...
8
8
 
Can caulk be microwaved?
I just got some caulk from the garage, a new tube of silicone. It was fairly cold in the garage, and the caulk is about 40 degrees. I put it a safe distance from the woodburning stove to warm up. I...
21
21
 
Crown Molding, Baseboard, Shoe, Door Casing - Live and Learn
What I did and what I'd do if I was doing it all over. Long-winded, but I don't know another way. Just telling what I learned. I'm no expert. Nothing exotic here. FLOORS/BASE/DOOR CASING/PLANNING...
4
4
 
Dishwasher Problem
Last January, we bought a new Kitchen Aid dishwasher, which cost about $550. There were bargain brands for $300 but we decided to get a better one this time. I installed it myself, as I have all the...
22
22
 
Re. Snow blower
I had replied to the group and said I bought a Toro Power Shovel, 12 inch wide but no snow here to try it out. Said I would update on this when we got snow. Well the next day we got 3 inches of powder...
2
2
 
Did I mess up my steam one-pipe system by fiddling with a radiator vent?
HI board. I love my old house but am learning about it as I go - including my one-pipe steam heating system. The boiler is new and works great (dont know specs) and until a recent outage here in CT it...
4
4
 
How to clean the painted interior of a microwave?
How to clean the interior of a microwave? My sister burned some plastic in her microwave. It has a typical off-white painted, enameled?, metal interior, and it's gotten surprisingly dirty. Spray...
19
19
 
Adding heat strips to HVAC sys
My heatpump is already backed up by NG. It also switches over to NG when outside temp is about 40F, so why add heatstrips. Rumor has it that in the next couple of years we are going to net metering of...
5
5
 
Trusses
I have a 24' X 32' pole barn, 10' sidewalls with the trusses on 2 foot centers. I would like to put in a small loft in the back. Would it be possible to remove 2 of the trusses and reinforce the...
4
4
 
Thanks Guys - For the Stud Finder Tip
Forgot to follow up sooner, but just mentioned the 200' or so of base, shoe and crown molding I put up, and that reminded me. Somebody here mentioned hard drive magnets. Stuck a piece of masking tape...
2
2
 
Change light in refrigerator
I bought replacement lamps for my refrigerator. Both bulbs are new and I tested them with a continuity tester to verify them. Neither bulb works in either socket. I also tested the center pin inside...
23
23
 
Ultimate Do-It-Yourselfers
These folks put together some very interesting homes: - Enjoy! http://www.odd50.com/oddhomes.php
2
2
 
Mold in your Home?
Molds all kinds of goodness and all kinds of badness By JeremyJohnson - Posted on August 25th, 2009 They are grown by the millions, but the wrong kind can kill you. They can threaten to destroy your...
 
Security Door - One Way Screws
I am about to install a security screen door which will be attached to the house with 8 included 4-inch color-matched one-way screws. Obviously, I need to get it right the first time. According to the...
19
19