Keeping Moisture out.....

Our Company Liquiguard Technologies Inc. is an innovator of new and unique protective coatings for use on everyday objects and specialized applications. Commonly available coatings have a basic polymer composition. Liquiguard Technologies coatings are complex formulations that will meet and exceed the requirements of the job at hand. Most of our coatings are water based, eco friendly and present no health hazards. They are clear, non-odorous and contain additives that discourage the growth of mold, mildew and other fungi. They contain inhibitors to prevent damage caused by invisible but harmful ultraviolet rays. Liquiguard Technologies development focus is to create application specific coatings that are the best in class. Coatings developed by us utilize the latest innovations in polymer technology. Our formulations focus on specific groups of materials and objects that need to be protected from hazards encountered during every day use. We pride ourselves on developing solutions that are truly effective and long lasting we have developed a very special product by the name of Liquitite SF.
Liquitite SF is a clear coating designed to protect and enhance the longevity of many everyday home and outdoor objects constructed from metal, wood, stone, brick, concrete, etc. It is totally non-staining and will not affect the colors or the material being coated. Commonly available coatings are solvent based and rely on acrylic resins with limited effectiveness and durability. Liquitite SF represents a new and unique coating developed to seal and protect objects from the effects of humidity, moisture and fading. Corrosion, oxidation and tarnishing can be slowed or inhibited with the use of Liquitite SF SF
Formulated from a blend of complex and innovative new resins, Liquitite SF is a water based, odorless, non-yellowing and non-polluting coating unlike any other available in the market today. More than a moisture repellant it is the first truly protective coating that can withstand spills of water, beverages, wine and other everyday products such as sauces, dressings and oil while keeping the coated objects free from mold, mildew and other fungi. This latter feature is especially beneficial for canvas coverings and slings used in boating and outdoor furniture. Liquitite SF contains unique ultraviolet inhibitors that will protect the objects from damage caused by exposure to sunlight, thus extending their life. If needed, coated objects can also be wiped down with warm water and mild detergents.
Liquitite SF can be sprayed or brushed on to the objects quickly and easily and will become tack free in 20 to 30 minutes at an ambient temperature of 77F. To achieve optimal results, however, a drying time of approximately 72 hours is recommended. The fully dried Liquitite SF film is highly durable and will stay in place and continue to provide optimal protection until physically removed or rubbed off.
To ensure that yourobjects are fully protected, Liquitite SF contains a special "tracer dye" that glows when exposed to ultraviolet light. Missing or inadequate amount of Liquitite SF can be easily detected by the absence of the telltale glow when the objects is exposed to a UV source. If too little Liquitite SF has been applied, simply apply another coating to correct the problem.
Liquitite SF is 100% water based and is available in aerosol cans, quart, gallon and five gallon containers. Aerosol cans contain solvent based propellants. Larger packing sizes contain concentrates which must be diluted with tap water. The recommended dilution is 2 or 3 parts of water to 1 part of concentrate.
To remove Liquitite SF coating from treated surfaces, use warm water and mild detergents or isopropyl alcohol. Do not use corrosive cleaners or strong solvents.
Liquitite SF is non-toxic and environmentally safe.
PRODUCT USAGE INFO 1. Surface to be laminated must be free of dirt, oil, grease and other loose debris. 2. Damp or wet objects should be thoroughly dried before coating. 3. Make sure that LiquitieSF and ambient temperature are at 50 F or higher. 4. Shake the aerosol can well before and frequently during use. 5. Hold the can upright and about 12 inches away from the surface to be sprayed. 6. Spray from all four sides of the object to be coated to ensure complete coverage. This constitutes one coating cycle. 7. Porous surfaces may require more than one coating cycle for optimal protection. 8. Each coating must be partially dry prior to application of additional coatings. 9. For maximum protection coat all exposed surfaces.
CAUTION: Propellants within the aerosol contain volatile solvents that can ignite easily. Keep away from open flame sparks or heat. Prolonged exposure to sunlight may expand the pressurized solvents and the can could explode. Do not puncture or incinerate. Do not store at temperatures above 120F. Vapor harmful. Use with adequate ventilation. Avoid contact with eyes and skin and prolonged exposure to vapors. If swallowed do not induce vomiting. Seek immediate medical attention. LEGAL INFO LIQUIGUARD TECHNOLOGIES, INC. WARRANTIES THAT A PROPERLY COATED OBJECT WILL NOT SUFFER DAMAGE FROM HUMIDITY, MOISTURE, LIMITED EXPOSURE TO NON-CORROSIVE LIQUIDS AND ULTRAVIOLET RAYS. USER IS SOLELY RESPONSIBLE FOR DETERMINING SUITABILITY FOR INTENDED USE AND ASSUMES ALL RISKS IN CONNECTION THEREWITH OTHER THAN AS WARRANTED HEREIN. WARRANTY EXTENDS TO ORIGINAL PURCHASER AND MAY NOT BE ASSIGNED OR TRANSFERRED. WARRANTY DOES NOT APPLY TO COATED OBJECT THAT HAS BEEN REWORKED, PHYSICALLY DAMAGED OR ABUSED AND PROVIDES NO LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL LOSS OR DAMAGE TO COATED OBJECTS. THIS LIMITED WARRANTY IS IN LIEU OF ALL OTHER EXPRESS OR IMPLIED WARRANTIES INCLUDING MERCHANTABILITY, FITNESS FOR USE OR FOR A PARTICULAR PURPOSE.
This article is for information purposes only and is not intended to solicit or sell anything for more information please visit our website at http://www.Liquiguard.com or email: snipped-for-privacy@Liquiguard.com
Add pictures here
<% if( /^image/.test(type) ){ %>
<% } %>
<%-name%>
Add image file
Upload

You think putting this bull crap disclaimer will change our attitude towards your advertisement? Did you make friends by posting an advertisement for free her? NO! You just pissed off anyone that really could use your product to the point they will go out of their way to buy your competitor's stuff.
Spamming newsgroups is not beneficial to any commercial venture. USENET was intended for the free discussion of topics and the exchange of information. Not for advertisers to get something for free. If you do this, how do you stop the dog food and beer commercials? Ed
Add pictures here
<% if( /^image/.test(type) ){ %>
<% } %>
<%-name%>
Add image file
Upload

Someday, it'll all be over....
Add pictures here
<% if( /^image/.test(type) ){ %>
<% } %>
<%-name%>
Add image file
Upload
Let me second that!!!! DIE SPAMMER DIE!!!!!!!!!
Edwin Pawlowski wrote:

Add pictures here
<% if( /^image/.test(type) ){ %>
<% } %>
<%-name%>
Add image file
Upload

Add pictures here
<% if( /^image/.test(type) ){ %>
<% } %>
<%-name%>
Add image file
Upload

HomeOwnersHub.com is a website for homeowners and building and maintenance pros. It is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.