Latest threads in Home Repairshow only best voted threads

Subject Author Posted Replies
 
Furnace won't heat
Model DGAT090BDD Furnace will turn on, ignite, blower comes on, but when calls for the propane to come in, it clicks, stays running, but blows cold air. The green indicator light blinks 5 times
4
4
 
New Trex deck
Workers just left, finishing deck in the rain. Photo taken through sliding door: Contractor still needs to clean up and county has to inspect. I had started looking into this back early in the year...
13
13
 
Shower arm spins and spins but will not come out
My shower arm unscrewed fairly easy but when I got to the end of threads it just spins and spins will not unscrew .I've pulled well everything I've never seen anything like it I have done this task...
7
7
 
Hard water - not filtered by water board?
That is true now. But was not true before dairy farmers routinely corrected the geographical deficiency. See Derbyshire neck.
162
162
 
Proper saw cut time
Our concrete was poured 2 weeks ago...the contractor never returned to do saw cuts. Is it too late to have saw cuts done now?
4
4
 
OT. Sears Canada is done
and looking at the even bigger picture... also civilizations m
37
37
 
Ready, AIM, fired.
The yellow running man went away when people stopped using the AOL software and really has nothing to do with AIM. It showed up during the connect sequence of AOL. These days I imagine most AOL mail...
1
1
 
Garage Door Questions ?
Hello, Thanks for suggestions re my son's automatic garage door opener cycling by itself. (single door garage; typical home garage and door) It's a pretty old unit, and does not even have the optical...
7
7
 
Intelligent satnav?
To err is human, to really fuck things up requires a computer.
59
59
 
Suck squeeze bang blow
It's a combustion engine, sorry about the pictures. People were supposed to think of wild sex.
2
2
 
Garage Door Opener Cycling Up & Down On Its Own ?
Assuming it is the newer ones with the optical safety, the reflector may have gotten out of whack and it thinks the door is going to hit something. That would cause it to go up. There is also a limit...
6
6
 
Toshiba microwave ovens
Hi All, I am looking at Anyone have experience with Toshiba microwave ovens? Are they 3C (cheap Chinese crap) that falls apart and catches fire in a year or are they of good quality? Many thanks, -T
3
3
 
Re: Do Gun Suppressors Really Silence 'The Sound Of Gunshots'?
Suppressors really don't work that well on revolvers anyway. Too much gas gets out between the cylinder and the barrel. A Dan Wesson with an adjustment there is better than most tho.
3
3
 
stucco repair
Hi All, My sister-in-law asked me to ask you guys what it the best way to paint and seal a broken chunk of stucco from one of her walls. Apparenlty, Google isn't working for her. Any words of wisdom?...
3
3
 
Grrrrr what is going on here?
I've just installed a ceiling fan , there was no prior fan but there was a switch at the door that controlled an outlet . the switch simply had a 12-2 w ground going into it. Its a spst switch so...
3
3