Woodworking Forum

  1. Home
  2. Woodworking Forum
51629 Threads Posts
to

Worth reading in Woodworking Forum

Elephant Bandsaw

Anyone know any words of wisdom on an "Elephant" bandsaw. Did a GS and couldn't find a thing. Had the chance to buy a 14...
6 comments posted 20yrs
posted by bhallc21
6 comments posted 20yrs posted by bhallc21

Johnson's Wax

In Honor of the recent paste wax thread, and specifically, in honor of Johnson's Paste Wax, I'm uploading an episode of...
2 comments posted 20yrs
posted by 77469
2 comments posted 20yrs posted by 77469

CA glue

Can anyone recommend something to put on an MDF jig to prevent CA glue from sticking to it? I tried carnauba wax, but th...
14 comments posted 20yrs
posted by JimStaley
14 comments posted 20yrs posted by JimStaley

Planer and drift wood

Will I damage my planer by putting some really dry drift wood from salt water through it. The wood is really hard and dr...
11 comments posted 20yrs
posted by dejefferson
11 comments posted 20yrs posted by dejefferson

Gluing veneer question

After waiting 3 weeks for some veneer to arive the seller refunded my money so I bought some veneer from another seller...
7 comments posted 20yrs
posted by wayneREMOVETHIS
7 comments posted 20yrs posted by wayneREMOVETHIS

Fisch Band Saw

I was looking at the 16" Fisch band saw on Amazon. Seems like a pretty good deal for what you get. Does anyone have any...
0 comments posted 20yrs
posted by <wizard2265
0 comments posted 20yrs posted by <wizard2265

A better or simpler method?

I presently have a strip of Alum. 3/8 thick, 1 1/8 wide, approx. 8 inches long. The 1 1/8 x 8 inch surface is reasonabl...
9 comments posted 20yrs
posted by thermo102
9 comments posted 20yrs posted by thermo102

I finally got a cabinet saw!

I fnally got down to Grizzly and purchased a 10 inch left tilt cabinet saw (early Christmas). Wow, what a difference fr...
11 comments posted 20yrs
posted by bryanberguson
11 comments posted 20yrs posted by bryanberguson

Pocket screws to attach edging to PB

I have a commercially made router table made out of 1 1/8 inch particle board for use in my table saw as an extension t...
5 comments posted 20yrs
posted by jadern
5 comments posted 20yrs posted by jadern

bending wood

I need to make a curved apron for a table. I was planning on laminating wood to form a curve with a 48" inside radius....
4 comments posted 20yrs
posted by rfichtenbaum
4 comments posted 20yrs posted by rfichtenbaum

Industrial Furniture Guides/Levelers Needed

I am having trouble locating some large, industial furniture glides. There are a million sources on the web, but most a...
11 comments posted 20yrs
posted by leemichaels*nadaspam*
11 comments posted 20yrs posted by leemichaels*nadaspam*

INSPRATION - Taborite Warwagon

http://www.fanaticus.org/DBA/eyecandy/warwagons/ww05.html Something like this could come in handy, if you have unfriend...
0 comments posted 20yrs
posted by Jakofalltrades
0 comments posted 20yrs posted by Jakofalltrades

Looking for Coffee Table Ideas.

I'm making my daughter a coffee table for her new house and would like some ideas or designs if possible. It's going to...
18 comments posted 20yrs
posted by creekbuster
18 comments posted 20yrs posted by creekbuster

Buying USA?

After spending sometime shopping this weekend, (which I hate) I'm finding out that nothing is made in the USA anymore....
53 comments posted 20yrs
posted by rent_my_husband
53 comments posted 20yrs posted by rent_my_husband