Evening all,
>
> I had a major trade show to look after last weekend, so not much has
> happening on my parents kitchen.
>
> I did manage to get in a little work on some drawers though. There are only
> 8 drawers in the kitchen. They are made from 5/8" thick solid hard maple.
> The drawer sides are glued up from leftovers and boards with
discolouration
that I didn't think made the cut for doors or drawer fronts. The drawer
> bottoms are 1/2" hard maple flat saw veneer plywood.
>
> I just finished the four drawer this evening and thought I would post some
> photos.
>
> First, the stack of boards fresh from being glued up, planed, drum sanded
> and ROS sanded.
>
>formatting link
> Second, The boards all cut to size.
>
>formatting link
> Third, cutting a tail board.
>
>formatting link
> Fourth, laying out the pin board.
>
>formatting link
> Fifth, cutting the pin board.
>
>formatting link
> Sixth, after gluing up the drawer, trimming the pins and tails
flush.
>formatting link
> Seventh, the four finished drawers.
>
>formatting link
> The drawers are not perfect, but I am very happy with how they have turned
> out.
>
> Four more to go...
>
> David.
>
> Every neighbourhood has one, in mine, I'm him.
>
Very nice work. I actually like the discoloration.