Mason & Sullivan Vienna Regulator Clock Plans

replying to Dr. Deb, Silence wrote: I too am interested in a copy of these plans. I had given up on ever finding them. Thank you for your consideration.

replying to Silence, Gee wrote: Are you still looking for the plans? I do have a set of plans and some of the instructions for it. The plans are too large for my scanner but I can probably use my camera and photoshop them into a PDF format.

Hi John, I know this post has been kicking around for a while but I too am in need of the 7672 Vienna Regulator instructions. Would you mind sending them to me as well?

John, I have been unsuccessfully searching for Mason and Sullivan Vienna Regulator plans. If you still have copies I would like to purchase a set from you, of course covering the cost of mailing, etc. If you have any, please reply to this message and I will send you my contact information as well as a check. Thanks, Gary Keiter

Hi John, should you still have a set of the Mason & Sullivan #7672 plans and assembly instructions, I would be happy to purchase copies of them. Having finally retired, I now have the time and incentive to build one of these beautiful clocks. Many thanks for your consideration!

Hello Leslie, I know this is an old post, but if you still have a copy of the #7672W plans/instructions I would be happy to pay you for them. Thank you for your consideration!

Hi Gee, If you still have a copy of the #7276 M&S clock plans I would be happy to pay you for them. Thank you for your consideration!

If you still want them, I purchased the trim kit with plans, and never built the clock. Let me look for them if you are still interested. My email address is in the system, so I think you can respond to this and reach me.

Rick Carr

Hello Rick, yes I am still looking for the plans. I would be interested in the trim kit too if you still have it. Please email me at snipped-for-privacy@yahoo.com with price, etc.

I just got back from dental appointment with the bad news that a cracked tooth will require a root canal. I will send you a copy of the plans, but I don't want to sell the kit, as I still want to build the clock one day. It is packed away in a storage unit, so it might be a day or two before you hear back from me.

Thank you very much. My address is 96 Coolridge St. Greenville, RI 02828 Please advise any expense you incur. Thanks again. Cole Metz

HI Rick, just checking in to see if you were able to locate the # 7672 M&S clock plans. You can reach me at colesmetz at yahoo dot com. Thank you.

HI Fred, just checking in to see if you were able to locate the # 7672 M&S clock plans. (Sorry, I mixed your name with someone else's on an earlier email today.) You can reach me at colesmetz at yahoo dot com. Thank you very much for looking. PS: Hope the root canal went well! (I have a son who is a dentist and can appreciate your situation.)

Hello Fred, have you had any luck in finding the M&S Vienna Regulator plans? Please advise. Thanks and Happy New Year! Cole Metz

Dear Mr. Carr, Were you ever able to track down the plans to the Mason & Sullivan clock? If so, please advise and I will pay you for the cost to copy and send them to me.

Thanks!

Cole Metz

Hello! My husband purchased (probably in the 1980's) the plans for a long Mason & Sullivan Vienna Regulator clock. I would like to post a picture to understand if we all are talking about the same clock--I have no plan number--but cannot figure out how to post a picture. It is a long simple design. The plans themselves are very simple--not extremely detailed--and there doesn't seem to be any info included on how to mount the works. While my husband decided to build this clock after M & S closed, he was able to source the clock works from someone in England. In the meantime he cut wood and let the project sit due to life. He is now deceased and I am having the clock built to honor his memory. However, I do not have hardware for this clock, nor do I have a clock works number to give to my woodworker so he knows how to set the supports for the clock works. Is anyone able to help me get the information I need (find a place to purchase the necessary hardware; get info on how to set the clock works support) as well as show me a picture of the clock being discussed?

I would be more than happy to share the plans that I have (when I get them back from the my woodworker) for your help. Thank you! S.

I would be interested in purchasing the Vienna regulator clock plans from you. You can contact me via e-mail at the following address: snipped-for-privacy@ulano.com I look forward to hearing from you soon. Regards,

Joe

Hi Cole, Apologies for not getting back to you. If you have not found a copy of the plans yet, I'll go to Staples to see if they can make a copy of them. I would still like to keep my copy in hopes of making one myself one day.