Latest threads in Woodworking Forumshow only best voted threads
Subject | Author | Posted | Replies | |
---|---|---|---|---|
|
Centerline of oblong
How can I locate the center-line on one of the flat sides of an oblong piece of wood?
3
|
11 years ago
|
3 | |
|
OT.garage entry:
I would like to install some type sensor ,indicator that signals when I have entered my garage far enough to close the door.Have any of you guys invented your own system? What do you use? Sal
33
|
11 years ago
|
33 | |
|
I just finish another job~
I started this project near the end of last month. My customer wanted simple red oak book cases that would hold loads of books and hot have any sagging shelves. The finish is Old Masters Gel Varnish,...
40
|
11 years ago
|
40 | |
|
O/T: Amazing
However there are bacterial illnesses that resemble a cold. You are being pedantic about the definition. For most people if their head is stopped up and they have a cough and sore throat, it's a...
182
|
11 years ago
|
182 | |
|
Uh-oh
-------------------------------------- It's a job for a reamer and a lathe. Depends what you have available for barter. Probably cost me a 12 pack. Lew
6
|
11 years ago
|
6 | |
|
Urns for veterans
My woodworkers club is making urns for unclaimed veterans remains... John For Some time NWA has been making URNS for the unclaimed Cremated remains of US veterans. The Patriot Guard Riders has a...
1
|
11 years ago
|
1 | |
|
Delmhorst G-22 moisture meter
Ok, I get it. But it's still a good tool, and a great price. Not as portable as the more modern units, but still valuable. Would be good in your shop.
4
|
11 years ago
|
4 | |
|
repair stationary belt sander
It sounds like a bearing is gone on my Craftsman 6"x48" stationary belt san= der. I have taken enough off to expose and remove the C clips on the ends = of the shaft. However, I can see no way to...
1
|
11 years ago
|
1 | |
|
Workshop space available SF Bay Area (advertisement sort a)
I am still looking for a second renter for my shop in Oakley California. 10x10 space for renter and access to all machines, tools, clamps, etc. Currently myself and one renter. I am only there nights...
2
|
11 years ago
|
2 | |
|
What is it? Set 447
I don't think jig is the correct term for it but it _was_ used for holding something, the patent states it's was to be used "in **** cutting".
19
|
11 years ago
|
19 | |
|
Estate Sale (a gloat finally :) )
tiredofspam wrote in news:uqudnSN33sBYKnbSnZ2dnUVZ Red oak cut local - S.E.KS probably. They didn't get much for the power tools the bandsaw and surfacer went for $250 and $400 each. It took 4 young...
6
|
11 years ago
|
6 | |
|
Card scrapers, sharpen 'em bro!
Join in on some scraper sharpening discussion and see how I do it: http://www.garagewoodworks.com/Forum/showthread.php?tid=96
21
|
11 years ago
|
21 | |
|
Re: You know your shop is too small ... PING HAN
Han, this decorative muntin grille design came from a G+ conversation with you about six months ago (two photos in row): liked it enough to use it on this project. Thanks for the idea!! :) (There is...
6
|
11 years ago
|
6 | |
|
Epoxy question
I'm making good progress on my thickness sander. I've elected to use 3/4 inch plywood for the drum and now have 20 discs that need to be affixed to the 1 inch cold rolled steel shaft. I have no...
4
|
11 years ago
|
4 | |
|
Redwood Source in Southeast Kansas Area???
Anyone found good redwood in the Southeast Kansas or Four-State region (Joplin, Fort Scott, Pittsburg, NE OK area. I have bought some in Wichita but that is a little too far out. RonB
6
|
11 years ago
|
6 |