UK Do-It-Yourself Forum

91894 Threads Posts
to

Part P - new summary

I thought it worth updating the wiki advice on part P, since the latest version introduces a number of significant chan...
7 comments posted 12yrs
posted by see.my.signature
7 comments posted 12yrs posted by see.my.signature

high water pressure

Hello, When taps are described as suitable for high water pressure or low water pressure, or reducers in toilet inlets,...
19 comments posted 12yrs
posted by invalid
19 comments posted 12yrs posted by invalid

Impregnating a tree stump for burning out?

I've got an old cherry tree stump which I really want rid of. It's probably about 10" high by 15" across, and the probl...
64 comments posted 12yrs
posted by davidlobsterpot601
64 comments posted 12yrs posted by davidlobsterpot601

Replaging floorboards - skirtings

As part of the lounge refurb we are going to lift the 1930s well hacked about floor boards and replace. Now all these b...
21 comments posted 12yrs
posted by nospam
21 comments posted 12yrs posted by nospam

Electrics for AV/audio - sockets or strips?

Currently planning to build the AV kit and the CD player into the fireplace opening. I could put loads of 13 amp socket...
88 comments posted 12yrs
posted by nospam
88 comments posted 12yrs posted by nospam

letter box springs...source

The springs in my letter box flap are all broken. I have checked ebay and googled but no joy as all are too large. Ther...
13 comments posted 12yrs
posted by weels51
13 comments posted 12yrs posted by weels51

Poll - toilet brush

Who uses a toilet brush and who uses something else? Me - toilet brush Mr Pounder - something else [add your name here.....
21 comments posted 12yrs
posted by no
21 comments posted 12yrs posted by no

TT earth question

A 1950's house with overhead phase/neutral and the only earth I can find is to the cold water rising main. I have a 5/8...
7 comments posted 12yrs
posted by dave
7 comments posted 12yrs posted by dave

Floating chimney stack

Looking at work needed on my girlfriend's house I found that the chimney st ack over the rear Victorian 'addition' has...
13 comments posted 12yrs
posted by petermeakins
13 comments posted 12yrs posted by petermeakins

replacing flex on a steam iron

My Moulinex Chronomate 50 needs the braided flex replaced - I have some but cannot work out how to open the thing. Ther...
10 comments posted 12yrs
posted by petermeakins
10 comments posted 12yrs posted by petermeakins

Kits to open gates automatically - help and advice

Hi Just a quick welcome and introduction - GateAuto is a family run business that has quickly grown into one of the lea...
8 comments posted 12yrs
posted by GateAuto.d71ff58
8 comments posted 12yrs posted by GateAuto.d71ff58

Noisey CH Pump

I've got a Grundfos UPS 15-60 CH Pump which has got a bit noisey, with the noise being transmitted via the pipes around...
5 comments posted 12yrs
posted by davidm_uk-notme
5 comments posted 12yrs posted by davidm_uk-notme

YCL PTC0001-01 RJ45 socket with magnetics

Does anybody know of a pin for pin replacement for the above RJ45 socket (no LEDs)? Lightening has released the magic s...
6 comments posted 12yrs
posted by allsortsnotthisbit
6 comments posted 12yrs posted by allsortsnotthisbit

Gas Fire thoughts

I have a Magiglo Gas fire with an open bed of "coals" under a pre-cast flue formed in the inner blocks of the cavity wa...
8 comments posted 12yrs
posted by Somewhere
8 comments posted 12yrs posted by Somewhere

OT: unrecognised credit card transactions

My latest credit card statement had two transactions on it which I'm 90% sure aren't mine. Both are in double-digits an...
3 comments posted 12yrs
posted by davidlobsterpot601
3 comments posted 12yrs posted by davidlobsterpot601