Which tape would be best? (Roofing)

[htmark98]

Hi can someone offer any advice, which one of the below would be best for me.

It's for a felt roof shed, and i'm planning on putting 6x1 of the sides (overhang) to make it look much neater. Now there will be a slight gap on the top between the flet and the wood. I'm having a 1" gap above the roof line so the tape will join to this.

Will the felt tape work

the Flashing tape

Thanks

[Gel]

Yes that would do or if you have some felt left over cut out a 9" strip to perform same function, and bed in with bitumen mastic and felt nails.

Re the tape always stick best if substrate brushed clear of dust/loose garnules, and after applying apply heat via paint stripper gun, even hair dryer. You'll see bitumen "fizzing" once hot enough and push tape gently down with gloved hands; use same tip with felt if you go that way.,

[htmark98]

Ah, so if i go for the tape option i would need to get a heat gun and stick it into place. Will go down the route and 'borrow' the missus hair dryer. Thanks