Stannah stair lift removal

Harry Bloomfield · 2016-12-15T11:13:05+00:00

OK, I have already done this the hard way, just a few weeks ago to decorate the stairs. Then I disconnected the rail from the brackets and lifted the two rail sections (straight run up the stairs) over with the chair still attached leaving the lower brackets in place. It wasn't an easy job to lift it and move it across and refit due to the sheer weight of it, but I couldn't see an easy way to lift the chair off the track at the time. Now I want to change the stair carpet and the lower part of the brackets are fixed to the stairs through the carpet, each bracket has four large screws into the wood. This time, I am thinking - remove one of the two sections of track, and run the chair off the end of the track. My original assumption was that the chair could be dropped onto the track anywhere, then just have some sort of bottom retaining clamp fitted. I have spoken to Stannah, who are not very helpful, quoting Elphin safety/ the world will stop spinning etc., they will remove for a fee and reinstall for a fee etc... Anyone know for sure the process please?

Dec 15, 2016 Last reply: 6 years ago 22 Replies

Rate this thread:

Steve Walker 6 years ago

A friend, who is a fan of classic minis, told me that the Haynes manual says for one task, "reassembly is not necessarily the reverse of disassembly", but says nothing more!

SteveW

Vote

samuel 6 years ago

replying to bert, samuel wrote: And when you have neither the installation or de-installation manual, you go with plan B.

Vote

jlmarr4 6 years ago

What tools are needed to remove the stairlift?

Vote

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required