A mate of mine is having problems with the boiler which cuts out when running normally. It is not under guaratee. He has contacted the installation plumber and the manufacturers and has been told it could be a Printed Circuit Board fault or a gas valve fault. But they don't really want to help any further....Their suggestions are wait until it breaks down and then get someone in. Can anyone help? Is this a known problem with the boiler. Someone has mentioned the thermocoupler might be faulty? Thanks for any help and guidance Mick
Potterton Suprimo 60 Boiler problems
Jan 13, 2005
3 Replies
In article , Mick writes
Have a Google search for cetled?? and Suprima, and discover all about the piece of pox that controls these things..
The gist seems to be c***p soldering on the PCB. Or at least remaking every solder joint on the PCB for my Suprima stopped the intermittent lockout.
Richard
In message , tony sayer writes
Or ...
formatting link
you can ring me on 01923 229224
Do I really go on that much ?
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required