It's about 90m2 so stone slabs are out. We have stone in other areas and it gets a slippery moss growth that has nearly "had" me a couple of times
It's about 90m2 so stone slabs are out. We have stone in other areas and it gets a slippery moss growth that has nearly "had" me a couple of times
OOI what is the problem with block paving and pine needles?
Actually, I've spec'd MOT Type 3
They rot down and provide a growing bed for seeds.
crushed limestone is MOT type 1 and it bloody well is porous. Huge gaps between the lumps that eventually get filled with porous limestone.
Even granite or basalt should be sufficiently granular to allow water through
Concrete is way cheaper than paviours
"Resin bound" is porous; "resin bonded" is not (as stated in the link you gave).
Just had mine done with resin bound, 100 m^2. Very happy with it.
not if all the voids are filled with tar.
You moved the goal posts. Why?
No I didn't - because tarmac had already been mentioned. That involves TAR.
A house near me has a one-piece concrete frontage accommodating four cars, patterned using rubber moulds applied before it went off, obvs. THe contractor told me that the concrete was a high cement mix. No sign of damage, yet. https://www.google.co.uk/maps/@52.6755378,-1.1683208,3a,75y,41.96h,77.56t/data=!3m8!1e1!3m6!1sjK0olozlaER5EXC7ST2YTg!2e0!5s20231001T000000!6shttps:%2F%2Fstreetviewpixels-pa.googleapis.com%2Fv1%2Fthumbnail%3Fpanoid%3DjK0olozlaER5EXC7ST2YTg%26cb_client%3Dsearch.revgeo_and_fetch.gps%26w%3D96%26h%3D64%26yaw%3D18.164822%26pitch%3D0%26thumbfov%3D100!7i16384!8i8192?hl=en&coh=205409&entry=ttu&g_ep=EgoyMDI0MDkyNS4wIKXMDSoASAFQAw%3D%3D(My tarmac, about 15 years old, has a pale spot that developed where the car was parked during and after covid.)
Have something to add? Share your thoughts — no account required.
Ask the community — no account required