Lighting for walk in utility cupboard

Apr 28, 2004 2 Replies

I need a light for a small utility room/cupboard (~1m x 2m)



Main requirements are:



Low profile - I've rigged up some washing lines running ~25cm below the ceiling. They're separated by about 40cm, and I want to put the light in the gap. I can put a second light somewhere to fill in shadows if necessary, but I think one will be fine.



Cool - halogens are right out, because they'll burn a hole in the washing. Plus there's loft insulation above, and I can't be faffed creating a clear space around to it to ensure adequate ventilation unless I really have to.



For once, cosmetics don't really matter. But reasonably bright would be good - preferably enough to work by since just about every piece of plumbing in the flat goes through this room.



Would something like:



Screwfix 15608 fit the bill? 18W, which I'm guessing is roughly equivalent to a 100W bulb, and I'm assuming it should run quite cool being fluorescent? Or is that overkill - would 13W be enough?



TIA,



Ben


Looks okay, or try one of the slimmer 2D fittings.

dont need that kind of power for a 2x1m space. 40w equivalent should be about right.

A ceiling mounted bulb holder (not a dangly one) plus a CFL is an easy flexible option.

Regards, NT

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required