Whats the best method for connecting a cooker and hob to an existing 6mm supply, the cooker is pre wired with 2.5mm cable?
- posted
20 years ago
cooker hob connection
Loading thread data ...
- Vote on answer
- posted
20 years ago
A cooker outlet plate controlled by a 45A DP switch. Surprised the prewiring is in 2.5mm cable, would have expected 4mm, really. Ensure the fusing is correct. I suspect it will need 30A fuse or 32A MCB, but read the installation instructions.
There's loads of choice for manufacturers for the bits. If you can find out what your existing electrics are, then use the same brand to get similar corner and switch appearances. Otherwise, examples are:
formatting link
?ts=02222&id=12187Christian.
- Vote on answer
- posted
20 years ago
What are the electrical ratings of the two appliances?