Latest threads in UK Do-It-Yourself Forumshow only best voted threads
| Subject | Author | Posted | Replies | |
|---|---|---|---|---|
|
|
findings sterling silver
Silver beads and findings is Wholesale supplier of sterling silver jewellery making components, Beads, Chains, Charms, semi precious stones in various shapes and sizes.
—
|
11 years ago
|
— | |
|
|
Power supply for single oven
Oops, where did that 3 go?
26
|
11 years ago
|
26 | |
|
|
open up chimney with brick arch
Hi folks I'm in the process of opening up my Victorian chimney breast to install my wood burner . Having taken off the plaster I have revealed a brick arch above the infill . Had a feeling this may be...
8
|
11 years ago
|
8 | |
|
|
What thread is on the bottom of a toilet fill valve?
I've got a toilet with a small leak where the copper pipe is connected to the fill valve. I want to replace a short section of pipe between the fill valve and the isolation valve on the copper pipe...
9
|
11 years ago
|
9 | |
|
|
Running flex from metal wiring box?
I've ordered a metalclad FCU box from Toolstation, in order to hard-wire in a wall-mounted heater for my workshop (for anybody who looked at that post, I went for a fan-heater in the end!). This is...
7
|
11 years ago
|
7 | |
|
|
Solar panel supplementary
My Father in Law has had solar panels installed for a couple of years now. (The ins and outs of the sales techniques is a whole other story but we are where we are and he now has them installed for...
32
|
11 years ago
|
32 | |
|
|
Part P - how far to go?
How far do you have to go to be compliant with Part P when working with an existing installation? You are't required to bring existing work up to standard of the current regs, right? The rule-of thumb...
14
|
11 years ago
|
14 | |
|
|
Cage clamp connectors
There was an interesting thread covering crimped connections a couple of days ago. Would I be correct in assuming that cage clamp type connectors such as Wago 222/224 could be used instead of crimps...
3
|
11 years ago
|
3 | |
|
|
Loft flooring - quick question
I am going to put in a bit more loft flooring, where the water tanks came out after the combi boiler was installed. Up until now I have cut the panels to fit half way across the joist so the ends are...
4
|
11 years ago
|
4 | |
|
|
Close coupled cistern toilet seat posts loose_any suggestions valued
My toilet seat (retaining) posts have become loose, but being close coupled cistern, have no access to what I presume are some form of plastic wing nuts underneath. I gather you can now get top...
—
|
11 years ago
|
— | |
|
|
Low water pressure - could the megaflo prv be the problem?
I've got decent mains water pressure and flow at the garden tap - around 3 bar and 30 lpm. But the pressure on the first floor is about 0.8 bar, and the flow is under 10 lpm. There's less than 3M...
5
|
11 years ago
|
5 | |
|
|
Ultimate D-I-Y?
3
|
11 years ago
|
3 | |
|
|
Anyone got any spare SODIMMS
anything 512MB and up considered: DDR 200 pin for Acer Aspire 1510.. NOT DDR2/3 and not over 1GB.. I've got 2x256M in there at the mo. Needs more:-( And a new battery..
6
|
11 years ago
|
6 | |
|
|
Interesting technology?
Interesting part is from around 3.40 Anyone got ideas on this? new technology?
4
|
11 years ago
|
4 | |
|
|
Anyone tried new high-tech lightweight filler with glass beads?
It was recommended to me and I've just bought a tub of Wilco's own brand stuff. Comes in a big tub that would usually weigh about half a kilo but feels like there's nothing in it! It looks like a...
10
|
11 years ago
|
10 |