Latest threads in Lightingshow only best voted threads
Subject | Author | Posted | Replies | |
---|---|---|---|---|
|
32w ballast question
My mother had a fixture put in with a 32w ballast in it running 4 40w bulbs. The lamp table shows it will run 3 of them. Would this cause the ballast to die after a month or so?
—
|
10 years ago
|
— | |
|
light will not turn on i replaced switch and i have power at light fixture but not at light switch
light will not turn on i replaced switch and i have power at light fixture but not at light switch
5
|
10 years ago
|
5 | |
|
Is it normal for some lights dim and other lights get brighter when appliances are turned on.
when testing voltage at outlets and panel I get a voltage drop to 100 volts on one line at main service and get equal voltage rise on the other line. 140 volts. Across the two lines remains...
—
|
11 years ago
|
— | |
|
One switch in two-switch fixture does not work
Hi I am replacing a bathroom switch that has two toggle switches one on top of the other. The top switch failed witch meant that i could not turn the fan off. By the way there is in addition to the...
2
|
11 years ago
|
2 | |
|
Outdoor lighting fixtures - fixture with build-in photosensor v. motion sensor v. separate motion sensor - what is best?
I am looking for two outdoor light fixtures to put on a stand-alone garage-size barn or shed. At first, I thought I wanted the classic barn lamp fixture but could not find one with built-in...
—
|
11 years ago
|
— | |
|
Anybody experience a GLS Halogen light bulb explode!!?
I have had a GLS Halogen light bulb explode on me ...... and I mean explode .... violently!! It shattered the decorative shade it was in and even though it had a shade around it, it left a debris...
—
|
11 years ago
|
— | |
|
I have power going through a switch, then on to three lights. Want to make one of the lights constant w/o running new wire bypassing switch.
have one set of wires(1 power,1 return,1 neutral) running to last light then other two are branched of of that. As it looks now I would have to cut several holes in wall to fish a new power wire to...
—
|
11 years ago
|
— | |
|
Any Low Voltage transformers without sensor or timer
I have a four-way switch to an outside receptacle, currently with a cover, open to the weather. Twenty years ago a 110v system was installed then removed. Are there any low voltage transformers...
—
|
11 years ago
|
— | |
|
hampton bay zenith motion sensor with flickering flame does not light up when appraoched.
hampton bay, zenith black outdoor motion sensor with flickering flame, big light goes on for 5 'seonds" and goes off/ what can i do to get the light to stay on for the amount of time i select. flicker...
—
|
11 years ago
|
— | |
|
HOW MUCH T8 4FOOT LIGHTING DO YOU NEED FOR AN ACCOUNTING OFFICE SETTING
OFFICE SPACE APPROXIMATELY 15' x 25'
—
|
11 years ago
|
— | |
|
How to wire a replacement light/fan/heater combo?
Replacing light/fan/heater combo. black/white and black/white/red wires at fan. How do I wire? All whites were capped together. Switch is already wired(3seperately) the new light/fan/heater is similar...
4
|
11 years ago
|
4 | |
|
I am trying to replace an S-55 Lumilux Sodium Vapor bulb with a CFL bulb.
Does a replacement bulb exist?
—
|
11 years ago
|
— | |
|
Why is my halogen replacement bulb not putting out a brighter light?
My overhead light in my bedroom went very dim the other day so I bought a replacement bulb for it. I was aware that you aren't supposed to touch the bulb itself so I was careful replacing it. When I...
—
|
11 years ago
|
— | |
|
i have four pot lights installed in my kitchen cupboard. One pot light gets hotter than the others and is causing discoloring of my cupboard
No further details provided
—
|
11 years ago
|
— | |
|
What size thread (nut) on the outside of the tube that accepts candleabra bulbs
We have a hanging light that has a white plastic tube in the center that is threaded both inside and out. The candelabra bulb threads into this tube and the globe is secured by a nut on the outside of...
—
|
11 years ago
|
— |