Wow! Now that is inviting.
You have really pushed 'cutting edge' architecture to a new level.
I like the razor spikes/stalagtites hanging from the ceiling.
It might look better if they were bloody though.
Thursten you are quite right there are a lot of impressive structures
that can be made this simple way, it do point to a different a new
architecture , but the bets of of all is how different it tread the
actural materials and how it work in a direct link from what you model
with Solids on a screen, into the actural building elements .
You see this is the new thing about it, that oposed today's architect
applications, that is rather a database with on-screen small drawings ,
--- roughly said -- then this again hand the oppotunity of shaping and
forming the actural building structure, without a thought of the
Now please don't misunderstand this as what you most often see today,
are the trend architects form and shape the outher limits of their
"spaces" also without a thought about what to holdit in the air --- but
they just hand the responsibility to the engineer where the idea with
this system are to prepare a workable lattrice , one that will surprise
you when you look closer to it, as it acturly bring all what is asked
for ; a direct link from screen to production without one single piece
of paper, and a total freedom to design round houses with square rooms
or the other way around.
Difficult to grasp at first, but check how the frames reach to shape
foundations for floors aswell as foundations for walls in a compleatly
different way, and in only one material.
Eh, --- just to be sure you see the most obvious thing about it, please
remember that this is the foundations, the core structure. Ofcaurse,
and this shuld be so obvious , you subtract the wall pieces the curtain
walls from the outher surfaces of this structure --- that way ,exactly
as you see how there are prepared for inserting and interlocking a
standard window , with frame , then the same are obviously possible to
do in the same 3D Solid model. ------- If I was to show each and every
floor board you wouldn't see anything but the outher surfaces and these
are not the important issue, but you would be a bad craftman not to see
how easy panels and surfaces are easily attached even interlocked,---
and the edges and room for these made, while each frame are cut.
-------- Sure a new system ask you to open your mind , but these issues
are so easy that it shuld not be nessery to show these in the drawings
, these drawings are not to show the detail connection between a put in
window frame or the notch to hold a curtain wall, they are there to
show the structure to hold it in the air.
With this , knowing that the materials are sheet materials, you see
surfaces closed and reverse thick "U" shapes held in the air by all
This is just the case --- you can say that the frames you see are the
real structure, a lattrice of steel sheets that notch overlap and
acturly by frames that can be cut easy with N.C. controlled cutters .
But what you don't see when displaying a structure like this one is, is
the fact that "inside" the thick shell of steel frame lattrice , things
like support for the floors , is made in the same instance, as cutting
the outher shell. Now this attitude are quite different than how you do
an extreamly difficult organic shape nowaday's, where you bundle stiff
profiles or spend the cost of a Farm, to force and twist em, nomatter
them steel beams by porpus, are made just that shape , not to be forced
twisted and bended, what you see bring in these Boolean artifacts are
not just an emty shell , sort of the useal emty metal tophat, but a
thry core structure, bringing floors and walls , ----- in one plain
material done with simple 2D. N.C. cutters .
Beside you better get used to it, ----- it acturly make Solid modeling
work the out real building compoments that digitaly fit together more
exact, than doing a sketch and then "translate" the 3D drawing by the
measure of a stick.
Now in this link you see other 3D-H frame lattrice, it make the wonder
of providing square rooms even in an organic shaped building, If you
can point to another more promising new method, that make use of 3D
models in such innovativ way I would like to know it, please refere a
likn to a better method one that will make a new architecture.
Please look if you are traveling the web for something new and exiting,
if you are here just to do the old usenet filth please know that no one
ask you to ansver.
HomeOwnersHub.com is a website for homeowners and building and maintenance pros. It is not affiliated with any of the manufacturers or service providers discussed here.
All logos and trade names are the property of their respective owners.