Without going to the garage to measure it, I think the legs are
3x3", top cross-members 4x1", bottom cross-members 2x1", top surface 6x1" for the front and back, with a lower section in the middle 1/2" thick.Chris
Without going to the garage to measure it, I think the legs are
3x3", top cross-members 4x1", bottom cross-members 2x1", top surface 6x1" for the front and back, with a lower section in the middle 1/2" thick.Chris
Chris J Dixon coughed up some electrons that declared:
Hi Chris,
That's useful knowledge - cheers
Tim
4x4 fence posts for the legs and 6x1 gravel board screwed on 4 sides top and bottom makes a cheap and sturdy base
I got my woodworker's bench - a really solid old one - for about 30 quid off ebay. Had to wait a bit of time for one to come up in my locality (you can set up searches on ebay so you get emailed when something possibly suitable gets listed).
David
HomeOwnersHub website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.