Woodworking Forum

51629 Threads Posts
to

Woodworking plan sites

I am new to hobby woodworking, I really enjoy making small things for around the house. Can anyone recommend any good si...
1 comments posted 22yrs
posted by iandrewey
1 comments posted 22yrs posted by iandrewey

Advice needed on securing wall cabinets

I trying to determine the best and most secure way of attaching wall cabinets to the wall without any nails or screws v...
4 comments posted 22yrs
posted by mbaybut
4 comments posted 22yrs posted by mbaybut

Re: Important parenting tips from Monty Python:

> Terry Jones > Wednesday June 16, 2004 > The Guardian > > For some time now, I've been trying to find out where my son...
28 comments posted 22yrs
posted by fatheree21
28 comments posted 22yrs posted by fatheree21

Gar** Shop Heaters

I'm finally tired of not using my gar**** shop in the winter and wanted to ask the wreck about shop heater opinions. It...
12 comments posted 22yrs
posted by jdgibson
12 comments posted 22yrs posted by jdgibson

Aged finish techniques?

Hello, I am about to attempt refinishing an old (not antique) kitchen table. The original linseed oil finish has seen b...
4 comments posted 22yrs
posted by glove99
4 comments posted 22yrs posted by glove99

Any recommendations for a jointer around $500 ???

Stationary or table top... 110 v 4" dust collection port Pros or cons welcome. Cons more so, the mfg's will all give me...
23 comments posted 22yrs
posted by ronaldjangel
23 comments posted 22yrs posted by ronaldjangel

Python memory use (psyco, C++)

I understand that psyco significantly increases memory use. Is that for code or data? More specifically, if I've got a...
32 comments posted 22yrs
posted by roy
32 comments posted 22yrs posted by roy

Sawstop cabnet saw nearing reality

FWW had a short write up about the first pre-production sawstop cabnet saw. More pictures at www.sawstop.com. I didn't...
105 comments posted 22yrs
posted by brian_j_roth
105 comments posted 22yrs posted by brian_j_roth

Glue Rcommendation - Cutting Board

I recently got 60 feet of 1.5" x 3" hard maple for free. I decided to make a rather large cutting/chopping board. What i...
38 comments posted 22yrs
posted by areidjr
38 comments posted 22yrs posted by areidjr

Hidden Lock? Cow Magnates

Well after The Kid rejected the dowel with magnet idea for the hidden lock on the LP albums cabinet we're working on he...
15 comments posted 22yrs
posted by charlieb
15 comments posted 22yrs posted by charlieb

My first Stanley hand plane, did I luck-out?

$32 in an antique alley (co-op) store. Hey everyone, I just bought a used Bailey #4 of impeccable condition, only very...
2 comments posted 22yrs
posted by ahem
2 comments posted 22yrs posted by ahem

Books

http://woodworking.homeip.net/wood/reference/books.htmI keep some comments here as a reference and every now and again I...
3 comments posted 22yrs
posted by gmmillen
3 comments posted 22yrs posted by gmmillen

Normite/Neander, Flat Boarder/Turner

I thought the term "Flat Boarder" was an interesting way to further differentiate a woodworker into a discrete category...
6 comments posted 22yrs
posted by grossboj_NoSpam
6 comments posted 22yrs posted by grossboj_NoSpam

Well it WOULD have been a gloat!

I stoped by my local Woodcraft today and out front was an 80% off table, so of course I had to rummage through it. As I...
6 comments posted 22yrs
posted by dhall987
6 comments posted 22yrs posted by dhall987

Anybody use the Signcrafter by Milescraft?

The bit that came with this is so short, it barely fits in the router. I am an ametuer, is there something that I'm miss...
4 comments posted 22yrs
posted by grbennett
4 comments posted 22yrs posted by grbennett