What glue's have you had luck with?

jtpr · 2004-09-22T17:01:14+00:00

Is glue really permanent? Are different glues used for differentwoods/applications?---Jim©¿©¬If you want to reply by email its --> ryan at jimryan dot comPlease use BCC and lets all avoid spam

Sep 22, 2004 24 Replies

Rate this thread:

mac davis 21 years ago

My wife started law school last month, which means that we no longer have a life.. Between about 50 hours of work a week, 4 nights of 3 hour classes, and

36 to 40 hours of homework, she doesn't sleep anymore...

Having put the RV in storage and can celled our netfliks subscription, I'm taking a positive approach to this and thinking that I have a 4 year window where I can spend all the time I want in the shop without worrying that she's becoming a "wood shop widow"..

I've done things with wood all my life, being raised in the sign business, but never had the knowledge or patience to try "finished" stuff.. I'm hoping that with a little more life under my belt, I can get rid of the "make it practical and don't worry about how it looks" attitude now and make nice stuff.. I realized years ago that this attitude was a method of avoiding the possibility of failure, if something didn't turn out "nice"..

My goal for now is to graduate from things like RV chock blocks (not a bad source of income and meeting folks, though) to things like jewelry boxes and things like that...

Mac

Vote

mac davis 21 years ago

thanks, Bob... I book marked them for more sober nights.. *g*

Mac

Vote

Unnh 21 years ago

I've had good luck with most glues I've used. Some cases, good and bad:

o construction adhesive: not alot of strength; my best use was in building up subfloors from several layers of plywood

o yellow glue (aliphatic resin?): no failures based on product; if glue was too old, or used improperly or outside intended use, bad results. Works on face joints, interlocking joints; woods, leather, stone, etc.

o resourcinol: very strong; poisonous before cured; can use in submerged application

o polyurethane: not very happy with this much-touted wonder glue. Several tubes I bought were in date but hardened before opening. When I did get a good tube, it was messy and not very strong.... This is totally anecdotal of course.

o Epoxy: when conditions are right -- good mix ratio, properly mixed, right application temperature, good surface prep, etc., can be very effective. Good strength and water resistance; may be submersible; fills gaps well, including making colored filler for wood or stone. DOES NOT withstand heat. Made some laminated parts combining brass and wood. Heat from sanding the brass flush to the wood caused bonding failure every time.

o Crazy/super glue (cyanoacrylate): must be fairly fresh; may be strong if applied correctly. Use top quality product for best results. (PS: don't get glued to a Rhino's butt --

formatting link

)

HTH,

/ts

Vote

BUB 209 21 years ago

3M 5200 in a tube where flexibility is a requirement, but bad in ridgid joints. For example, I used it in the wooden trunk lid frame of a 1930's car and the thing flopped all over the place, but would not let go. It's a boat sealant. Works great on teak, rosewood, etc.

Vote