Re: Somebody make me some 1/4" quarter-round????

I need to buy, or have made, some 1/4" X 1/4" quarter-round or it could be

> 5/16" X 5/16". > > Paint grade pine or poplar. > > I would like 112 pieces that are approx 48" long. > > Ship in a protective tube/box to Birmingham, Alabama. > >

Go to Home Depot or Lowes. It will be cheaper

Reply to
Frank Ketchum
Loading thread data ...

I thought they should have it, but both places only go as small as 1/2" X

1/2".

Reply to
Uncle Matt

Forget about the borg. Go to a real lumber yard.

Reply to
peter

Matt wrote: Group: rec.woodworking Date: Mon, Aug 18, 2003, 6:01pm (EDT-1) From: snipped-for-privacy@charter.net (Matt=A0Slay) I need to buy, or have made, some 1/4" X 1/4" quarter-round or it could be 5/16" X 5/16". Paint grade pine or poplar. I would like 112 pieces that are approx 48" long. Ship in a protective tube/box to Birmingham, Alabama.

****************************************************** Wh not make them, using a router table with a roundover bit and a TS with a fine tooth blade? All you have to do is round over the edge of a 1/4" board and rip it on down, repeating the process over and over again until you have as many as you need. Be sure to use a zero clearance insert on the TS. Peace ~ Sir Edgar =F8=F8=F8=F8=F8=F8=F8=F8=F8=F8=F8=F8=F8=F8=F8=F8=F8=F8=F8=F8=F8=F8=F8=F8=F8= =F8=F8=F8=F8=F8=F8=F8=F8=F8=F8=F8=F8=F8
Reply to
Sir Edgar
****************************************************** Wh not make them, using a router table with a roundover bit and a TS with a fine tooth blade? All you have to do is round over the edge of a 1/4" board and rip it on down, repeating the process over and over again until you have as many as you need. Be sure to use a zero clearance insert on the TS. Peace ~ Sir Edgar øøøøøøøøøøøøøøøøøøøøøøøøøøøøøøøøøøøøøø
Reply to
CW

Matt ~

Do you have the equipment to make your own 1/4" quarter- round per my previous post? If not perhaps you can go to the local technical high school woodworking department, if there is one where you live, and have them made.

Peace ~ Sir Edgar =F8=F8=F8=F8=F8=F8=F8=F8=F8=F8=F8=F8=F8=F8=F8=F8=F8=F8=F8=F8=F8=F8=F8=F8=F8= =F8=F8=F8=F8=F8=F8=F8=F8=F8=F8=F8=F8=F8

Reply to
Sir Edgar

HomeOwnersHub website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.