After removing the bolt inside the chuck the chuck then threads off the shaft with a common right hand turn.
Don Dando
RE: Removing DeWald Chuck
Feb 15, 2007
1 Replies
To unscrew the chuck, put the short end of a large allen wrench in the chuck and tighten the chuck on it. Then hit the side of the long part of the allen wrench with a sharp hammer blow in the direction that will unscrew the chuck. The hammer blow will break it free.
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required