Melamine pull out drawers advice needed

Am building a bunch of white melamine pull outs. The front of the box will be melamine (no wood face) I want to size the front so it overhangs 1/2" on each side to hide the slides also won't show any seams from the front. Whats the best way to attach the front to the carcass without the front showing screw holes?

Thanks to all.....

Reply to
OneThou
Loading thread data ...

You have two choices. Make the front an integral part of the box, or make it a separate piece that gets screwed on from inside the box.

The second option has a number of advantages...you make the box however you want, and drawer front alignment can be done after all the slides are mounted and locked into place, saving some fiddling with the slides.

Chris

Reply to
Chris Friesen

Seperate box with face screwed from inside the box.

Use carpet tape tp hole it > Am building a bunch of white melamine pull outs.

Reply to
Pat Barber

HomeOwnersHub website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.