Latest threads in Woodworking Forumshow only best voted threads
Subject | Author | Posted | Replies | |
---|---|---|---|---|
|
Dulling a finish
A few minutes with some 000 or 0000 steel wool will knock the sheen right off. You would have been better off to leave the stone finish alone as it is meant to be a complete, high build, high solid...
11
|
15 years ago
|
11 | |
|
Milwaukee router
Any thoughts about the Milwaukee router kit Amazon is offering for $129? Looks like a great deal, but I got snookered on the Woodcraft $99 Freud router, which turned out to be a piece of crap. Larry
10
|
15 years ago
|
10 | |
|
Expanding round table
I did some research on the expanding round table I saw a video of on YouTube = also found a patent = 's an article by a builder of the table = http://tinyurl.com/dhlgewI http://tinyurl.com/clzosaHere...
—
|
15 years ago
|
— | |
|
Best Place for Dust Port on Bandsaw?
I want to put a dust port on this wonderful Jet JBS-14mw. Where's the best place to put a dust port? I know I can look at pictures of other saws, but sometimes the wrong engineers decide that. Like...
10
|
15 years ago
|
10 | |
|
[OT] Fluidyne (and solar powered!) Engines
I've been taking "stirring" lessons here. :) Anyway it appears to be paying off... I added photos of fluidyne engine work from folks aound the world to my web site and, because a few of the folks here...
9
|
15 years ago
|
9 | |
|
How do I build a car out of wood?
Just follow the steps of this industrial design student. http://www.charlotteobserver.com/local/story/640199.html
—
|
15 years ago
|
— | |
|
Source for "Mountain Mahogany"...?
Howdy, I have been trying without success to locate a source for a wood sold as Mountain Mahogany. The botanical name is "cercocarpus ledifolius." Might you have suggestions? Many thanks,
12
|
15 years ago
|
12 | |
|
New Milwaukee sliding compound miter saw?
Does anyone here have one? I'm wondering how good it is. Max
23
|
15 years ago
|
23 | |
|
Small company display at HomeShow
Shop-built display that fits in one load in a Safari van. http://i123.photobucket.com/albums/o290/Robatoy/HomeShow.jpg
4
|
15 years ago
|
4 | |
|
table saw motor binding electrical smoke resistance noise jerky....how BAD
My table saw motor has gone bad. It was like the blade was binding on something, and came to a fast stop when switched off. Then there was significant electrical smoke I had to air out. I unplugged it...
38
|
15 years ago
|
38 | |
|
Lee Valley / Veritas Has Done It AGAIN!
If you've been into woodworking for any time at all, you probably are aware of Lee Valley / Veritas, and if you aren't - you should be. In addition to great stuff at reasonable prices AND great...
5
|
15 years ago
|
5 | |
|
Dust Collection Capacitor?
A capacitor at its simplest is two conductive plates separated by a dielectric or insulator. So, given conductive metal strips of sufficient size and a dielectric of PVC pipe, could the static charge...
13
|
15 years ago
|
13 | |
|
Home made hinges and latches for small boxes
I would like to make some hinges and latches for some small wooden boxes. Since I have some leather, that seems to be a good choice for the hinges, but I'm looking for some ideas on shop-made latches....
7
|
15 years ago
|
7 | |
|
See the Upgrade to my Bandsaw
Upgrades to my Jet JBS-14mw you had to unscrew 4 knobs and take both top and bottom covers off, just to get inside to change the blade. I connected the 2 covers together and put them on hinges,...
11
|
15 years ago
|
11 | |
|
Houston Woodworking Show
DON'T EXPECT MUCH And I have to ho back tomorrow to return some BAD DOG drill bits. These Bad Dog drill bits have a life time guarantee and will be resharpened for life for free but I guess you would...
17
|
15 years ago
|
17 |