Where can I buy a large analogue meter?

There are no pistons in an electric car, stupid.

On a sunny day (Fri, 15 Apr 2022 09:08:46 +0100) it happened "Commander Kinsey" snipped-for-privacy@nospam.com wrote in snipped-for-privacy@ryzen.lan:

Just for the sake of argument, and because posting to DIY and electronics.design driving an RC servo is not that hard:

You may want to use a PIC with ADC so you can measure voltage I use a lot of 18F14K22 in all sort of projects

Clearly the units have to be converted.

Never played with those things. I only have 100 cores of Window PC.

I'd guess our resident village idiot has no idea of what large analogue meters cost.

No. It can be done entirely in analogue. Servo motor controls a potentiometer that balances out a potential divider to match the incoming unknown voltage. Classic A level physics experiment.

Put a needle on the shaft of the pot and you are done!

It is how all servos were done once upon a time in the pre digital age.

Obviously you have never seen the evolution of cars, airplanes, electronics and the advances that can be made in five years.

Cars today no longer have to be hand cranked to start and the top models even have heaters in them. Amazing the progress they made.

use a regular size meter modified to have a glass back with an overhead projector.

On a sunny day (Fri, 15 Apr 2022 13:12:19 +0100) it happened Martin Brown <'''newspam'''@nonad.co.uk> wrote in <t3bnf4$17oc$ snipped-for-privacy@gioia.aioe.org>:

This is about RC servos, easy to obtain anywhere at low cost for small ones,

Those servos have a chip to drive the motor and a potmeter feeds back to it as you described. The RC protocol is almost universal. Maybe you could hack one but then you need to design the drive electronics and comparator. Remember servo turns both ways... Would be a lot more work. Else SHOW us what you have.

To make PWM from DC volts you'll need a ramp generator and a comparator. The ramp doen't need ot be perfectly linear, you can adjust the scale markings.

Obviously you haven't .

Nothing much has changed in any of those fields - they are pretty mature tech.

Nor have they been for the last 60 years

and the top models

I remember heaters in the 1950 cars

Amazing the progress they made.

Amazing the delusions you suffer from

I don't understand why people go into engineering and science. According to you, everything is already invented and will never get better. Nothing can or will be improved.

RC servos are the bomb. I've used them to rotate diffraction gratings in spectrometers.

For applications needing higher performance than a dial meter for demos, you can get Oilite bronze bearings, titanium gears, high speed, and gobs of torque for $150 in onesies.

Cheers

Phil Hobbs

Coincidentally, I had a conversation this morning with an engineer who works for Ford. He works in image processing; one of the projects he worked on a few years ago enables the backup camera to initiate braking if it sees an obstacle. He actually benefited from this feature on a cloudy, gray day when he was backing up toward a gray car.

My husband gave him an idea for additional features for automatic headlights. He said he'd split his bonus with us if he gets one.

There really is a lot more going on than you realize, TNP.

Yes. And when, on the plant, they have volts they can drive an electronic device that is going to be cheaper, more accurate, have logging and remote transmission capability, be self illuminating, etc etc. And when it stops working they know the volts have stopped too.

As I said, chemical plant still has a use for pressure gauges.

But there's the basic idea a big analogue thing gives you a rough reading fast, and a digital one gives you an accurate reading slowly. Compare analogue clock face to digital watch. Compare analogue speedometer to digital.

Surely there are digital ones of those?

I think TNP has reached his ?new tech? limit.

The automatic headlights on my car are quite amazing. I haven?t worked out how the work but they?re a *lot* more sophisticated that a simple forward pointing photocell. I suspect some fairly serious image processing is going on.

Tim

If you know how to use one, I've never even seen one. Do I have to use Linux?

And please stop removing the other groups, there are people discussing this in the UK and in an electronics group.

They go into engineering in order to ensure they dont waste millions of other peoples money trying to invent stuff that will never work, because it cannot work.

BEVs are very mature technology. There is only a bit left to improve. Like aircraft and cars in general.

But believe what you will. Its nicer to beleive in warm cuddly optimistic s*it rather than face reality.