I have a earlex steamer...bought it new for 130 quid. proberlem is it don't seem to do the job very well and im wondering if its due to not enuf steam getting to the plate. there seems to be more steam escaping through the tank cap than getting to the plate...is this normal?
Steve
Don't know about your Earlex, but I have a Bosch which I bought for £30, and it's superb. Lots of steam, very speedy stripping.
Same for beeline professional, certainly no steam coming from that filler cap
The cap on the tank is also a safety valve, if your Earlex is like mine. If ANY steam is coming out of the cap, I would think that there's a blackage somewhere preventing steam from getting where it ought to.
I would check the pipe, plus the place the pipe attaches to, to make sure they are not obstructed.
HTH. Tim Hardisty. Remove HAT before replying
ta all. truned out to be a fault on the ferrul? that ataches to the elbo on the steamer.... earlex god bless em have sent me a new one which i hope to recive tomorrow.
steve
HomeOwnersHub website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.