I have partly installed a thermo shower along with a new bath. The shower is a bar type with the temperature control on the right hand side as a user would view it. I just want to confirm that the cold water inlet is always on the temperature control side for a bar type..
Correct?
Arthur
NO check the installation instructions if you don`t have then hit their web site
To confirm my description.
--------------------------- | | | | | | | | | | | | | (taps) | | C H |
--------------------------- 1 X==========X 2
1 represents the Temperature control 2 represents the flow control.I'm unable to find the manual at this time and don't know the name of the maker.
I decided that the cold inlet would be on the same side as the cold tap to simplify the pipework.
Arthur Arthur.
In message , Arthur writes
And if they aren't and it doesn't work properly once all built in and finished.....
Maybe it would be worth connecting it up temporarily - a bit of Hep20 and a few fittings might help here and checking that it all works properly first?
Thanks, Chris.
I was thinking of using a couple of those short flexible copper pipes if they aren't too long.
Arthur
Have something to add? Share your thoughts — no account required.
Ask the community — no account required