A print mounted on a thin aluminum sheet came apart from the plastic frame it was glued to after a slight bump. (There is no glass to hold it in).
It was attached by rubbish double sided Sellotape.
I want to use a plastic tape to re-attach the aluminium sheet to the frame from behind. Rather than double sided tape under the aluminum which is how it was done originally . To tape the aluminum on to the frame from behind. I know currently you can get so called 'peelable' sticky 'paper' labels that will easily peel off, even after years of being attached. Not like the ones years ago when the adhesive on labels would Solidify and then be the devil to get off anything. Some time ago i got hold of a bit of Japanese Electricians insulating tape. This was also brilliant as the adhesive did not go hard. Would anyone know where i could buy a similar non hardening plastic tape. Thanks.