Hi. I am having to re-lay some lam flooring at the end from where I originally fited it. Taking it up was easy enough of course, but is there a technique for fitting the stuff from the wrong direction?
Thanks.
Arthur
refiting laminate flooring - from wrong edge.
Nov 22, 2009
3 Replies
Well...I might have found a method...using another piece of laminate to use as a hammer block. But fugg knows how I'm gonna get the last pieces in.
Arthur
I used a clamp puller to get the last piece of mine in, the type used for laminate flooring as most reach across the room
-- Mart
Arthur 51 wibbled on Sunday 22 November 2009 13:27
You might get away with a pull bar (tap with hammer):
formatting link
|Flooring+accessories|14258223&c_1=1|category_rootFlooring+and+Tiling|14046987But the clamp method others have mentioned would probably be more controllable and you could exert clamping pressure on two or three points.
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required