formatting link
Well the ground workers that ran it over did.Straightened it up with a tow rope and added a splint.
Council turned up today and removed it.
Fixed it
Dec 07, 2020
Last reply: 5 years ago
8 Replies
!
Good DIY!
Bill
Does it say "no parking here" ?. I can't read those signs.
A Grand Designs program filmed in Edinburgh over 10 years ago, showed the self-build couple move the street lamp outside their property about 2 or 3 metres so it wouldn't interfere with a window?
But the use of cable ties points the finger of blame at Adam. Council might send him the bill.!!!
No, neighbourhood snitch and probably dogshit/smartwater/etc notices
formatting link
I moved a street name sign so we could widen our drive. Church street is about 2m longer than it should be.
>
And we will never know. The council removed the fuse and used an angle grinder to cut it down to about 1m height.
And yes they put up a road closed sign and a sign that overhead works were taking place before wrapping what was left in black and yellow tape.
Is it though?
You can see how the bottom of the lamp post has split.
But pulling it back upright weakened the other side of the post. Now what if the wind blew right to left?
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required