Hello, I am planning to install an extractor fan in the bathroom to be triggered by the light switch. The fan will need to be ceiling mounted but the question is where to vent the ductwork to? Ours is an old house with no gaps at the eaves. I assume that it is undesireable to vent moist air to the loft space. Thanks, Ian Scotland
Extractor Fan
Feb 29, 2004
4 Replies
We vented ours into the wall, which led straight into an old chimney, and right up the flue...!!
How lucky was that?
A hole through the gable, if it's more than 3m away you'll need a centrifugal fan. ..
SJW A.C.S. Ltd.
If you are considering long duct lengths, check out the loss in efficiency - particularly with the corrugated plastic type duct. Looking at the packaging in a standard £25 kit, I noticed the extraction flow rate can drop by as much as 50% of free air rate for the fan when using flexible. If you want an extraction system that works, I recommend you look at the Vent Axia system calculator brochure. I'm not plugging Vent Axia, but their brochure makes you aware of things to consider when installing this stuff.
HTH
Phil
I originally wired my shower room fan this way. Bad idea in our house. The children sometimes leave the light on and we end up with the hot air being sucked out of the house. I have now moved to a separate ceiling switch.
Colin
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required