Changing handed-ness of ceramic disc taps

chris French · 2014-01-07T18:11:36+00:00

OK, bath with a wall spout and separate wall mounted ceramic disc taps. As is normal the hot and cold turn in different directions for off and one. One normal mixer taps this seems ok, but in this setup it's a little thing that bugs me as my hands want them to go the same way - like standard taps. Before I pull one apart, Is it possible to modify one so that it turns off the same way? I assume it is achieved either with stops inside the tap in different places or the ceramic discs being aligned differently? I've never had to fix one yet, so never taken one apart before (And yes I know I could just rpelace one of the cartridges, but a few solution would be nice:-) )

Jan 07, 2014 23 Replies

Rate this thread:

YorkshireDave 9 years ago

you've learned these simple tasks.

Tim. Your heart warming welcome leaves me overcome with emotion. YD

Vote

The Natural Philosopher 9 years ago

You bring nothing of any value.

Vote

Andy diyplumb 8 years ago

replying to YorkshireDave, Andy diyplumb wrote: I just dismantled a cheap pair of cartridges. The ceramic discs and the spindles are the same. the differences are in the body, the quarter turn stops are offset 90 degrees to make them H or C.

Vote